Answer:
the velocity of the point P located on the horizontal diameter of the wheel at t = 1.4 s is 
Explanation:
The free-body diagram below shows the interpretation of the question; from the diagram , the wheel that is rolling in a clockwise directio will have two velocities at point P;
- the peripheral velocity that is directed downward
along the y-axis
- the linear velocity
that is directed along the x-axis
Now;
Also,
where 
(angular velocity) = 
∴ the velocity of the point P located on the horizontal diameter of the wheel at t = 1.4 s is
The response is False, both bars, iron bars and plastic
bars have de same inertia, this characteristic does not depend on the type of
material, the inertia depends on his transverse section, since we can estimate
in the following formula
<span>Area moment of inertia Ixx = BH3/12</span>
<span>Area moment of inertia Iyy= HB3/12</span>
Answer: Attach it to clothing, personal flotation device or the person's person.
Explanation:
This particular Question or problem has to do with the rules and regulations or laws governing the use of Personal Watercraft(PWC) in the state of Florida in the United States of America. Hence, one of the rules that is applicable to the use of boats and waterways or the use of personal watercraft in Florida is that in florida, if ones pwc is equipped with an engine cut-off lanyard the person operating it must ATTACH IT TO THE CLOTHING, PERSONAL FLOATATION DEVICE IR THE OPERATORS' PERSON.
Another rule band the use of flammable personal flotation device with Personal Watercraft(PWC) in the state of Florida. All this rules and guildlines are made to limit or minimize hazards.
Answer:
protons (+ charge) & neutrons (neutral charge)
however protons has a positive charge so it determined what atom it is.
Answer:
x = 0.0734 m = 7.34 cm
Explanation:
First we shall calculate the area of the piston:
Now, we will calculate the force on the piston due to atmospheric pressure:
Now, for the compression of the spring we will use Hooke's Law as follows:
where,
k = spring constant = 3400 N/m
x = compression = ?
Therefore,
<u>x = 0.0734 m = 7.34 cm</u>
