To get an accurate pressure reading, the tires must be checked when cold. True or False

1)Saturated steam at 1.20bar (absolute)is condensed on the outside ofahorizontal steel pipe with an inside and outside diameter

S_A_V [24]

Answer:

hi = 7026.8 W/m^2.k

Explanation:

Given data :

pressure of saturated steam = 1.2 bar

Horizontal steel pipe : inside diameter = 0.620 , outside diameter = 0.750 inches

temperature of water at entry = 60°F

temperature of water at exit = 75°F

velocity of water = 6 ft/s

Calculate the Inside convective heat transfer coefficient ( hi )

mean temperature ( Tm ) = 60 + 75 / 2 = 67.5°F ≈ 292.877 K ≈ 19.727°C

next : find the properties of water at this temperature ( 19.727°C )

thermal conductivity = 0.598 w/m.k

density = 1000 kg/m^3

specific heat ( Cp ) = 4.18 KJ/kg.k

viscosity = 0.001 pa.s

velocity of water = 6 ft/s ≈ 1.8288 m/s

∴ Re ( Reynolds number ) = 28712.16

and Prandtl number ( Pr ) = (4180 * 0.001) / 0.598 = 6.989

finally to determine the inside convective heat transfer coefficient we will apply the Dittos - Bolter equation

hi = 7026.8 w/m^2.k

attached below is the remaining solution

3 0

2 years ago

An interior beam supports the floor of a classroom in a school building. The beam spans 26 ft. and the tributary width is 16 ft.

saul85 [17]

Answer:

a. $L_o$ = 40 psf

b. L ≈ 30.80 psf

c. The uniformly distributed total load for the beam = 812.8 ft./lb

d. The alternate concentrated load is more critical to bending , shear and deflection

Explanation:

The given parameters of the beam the beam are;

The span of the beam = 26 ft.

The width of the tributary, b = 16 ft.

The dead load, D = 20 psf.

a. The basic floor live load is given as follows;

The uniform floor live load, = 40 psf

The floor area, A = The span × The width = 26 ft. × 16 ft. = 416 ft.²

Therefore, the uniform live load, $L_o$ = 40 psf

b. The reduced floor live load, L in psf. is given as follows;

$L = L_o \times \left ( 0.25 + \dfrac{15}{\sqrt{k_{LL} \cdot A_T} } \right)$

For the school, $K_{LL}$ = 2

Therefore, we have;

$L = 40 \times \left ( 0.25 + \dfrac{15}{\sqrt{2 \times 416} } \right) = 30.80126 \ psf$

The reduced floor live load, L ≈ 30.80 psf

c. The uniformly distributed total load for the beam, $W_d$ = b × $W_{D + L}$ =

∴ $W_d$ = = 16 × (20 + 30.80) ≈ 812.8 ft./lb

The uniformly distributed total load for the beam, $W_d$ = 812.8 ft./lb

d. For the uniformly distributed load, we have;

$V_{max}$ = 812.8 × 26/2 = 10566.4 lbs

$M_{max}$ = 812.8 × 26²/8 = 68,681.6 ft-lbs

$v_{max}$ = 5×812.8×26⁴/348/EI = 4,836,329.333/EI

For the alternate concentrated load, we have;

$P_L$ = 1000 lb

$W_{D}$ = 20 × 16 = 320 lb/ft.

$V_{max}$ = 1,000 + 320 × 26/2 = 5,160 lbs

$M_{max}$ = 1,000 × 26/4 + 320 × 26²/8 = 33,540 ft-lbs

$v_{max}$ = 1,000 × 26³/(48·EI) + 5×320×26⁴/348/EI = 2,467,205.74713/EI

Therefore, the loading more critical to bending , shear and deflection, is the alternate concentrated load

7 0

2 years ago

Words and numbers can be printed using many different or type styles.

Nitella [24]

I believe the answer is

Appendix

8 0

2 years ago

An important material for advanced electronic technologies is the pure silicon.a)-True b)-False

elena-s [515]

Answer: False

Explanation:

Pure silicon is a good semiconductor, which conducts electricity when is mixed with some other component and can also work as an insulator.It is found abundantly on the earth's crust area. It is widely used in mixed form in the advanced electronic technologies but not in pure silicon form . So silicon is the important material in the advanced electronic technologies but not the pure silicon form.

8 0

2 years ago

The mechanical properties of some metals may be improved by incorporating fine particles of their oxides. If the moduli of elast

mezya [45]

Answer:

171.2 GPa

Explanation:

I explained every step in the attached file, please kindly go through it.

But the answer is 171.2 GPa

3 0

2 years ago