Ask question

Ask question

All categories

2 years ago

10

Which of these is the unit of measure for work?

2 answers:

Anastasy [175]2 years ago

7 0

The SI unit of measure for work, as well as
for all other kinds of energy, is the "joule".

sergiy2304 [10]2 years ago

3 0

Which of these is the unit of measure for work?

B. Joules

You might be interested in

A uniform beam with mass M and length L is attached to the wall by a hinge, and supported by a cable. A mass of value 3M is susp

Jobisdone [24]

Answer:

The tension is $T= \frac{11}{2\sqrt{3} } Mg$

The horizontal force provided by hinge $Fx= \frac{11}{4\sqrt{3} } Mg$

Explanation:

From the question we are told that

The mass of the beam is $m_b =M$

The length of the beam is $l = L$

The hanging mass is $m_h = 3M$

The length of the hannging mass is $l_h = \frac{3}{4} l$

The angle the cable makes with the wall is $\theta = 60^o$

The free body diagram of this setup is shown on the first uploaded image

The force $F_x \ \ and \ \ F_y$ are the forces experienced by the beam due to the hinges

Looking at the diagram we ca see that the moment of the force about the fixed end of the beam along both the x-axis and the y- axis is zero

So

$\sum F =0$

Now about the x-axis the moment is

$F_x -T cos \theta = 0$

=> $F_x = Tcos \theta$

Substituting values

$F_x =T cos (60)$

$F_x= \frac{T}{2} ---(1)$

Now about the y-axis the moment is

$F_y + Tsin \theta = M *g + 3M *g ----(2)$

Now the torque on the system is zero because their is no rotation

So the torque above point 0 is

$M* g * \frac{L}{2} + 3M * g \frac{3L}{2} - T sin(60) * L = 0$

$\frac{Mg}{2} + \frac{9 Mg}{4} - T * \frac{\sqrt{3} }{2} = 0$

$\frac{2Mg + 9Mg}{4} = T * \frac{\sqrt{3} }{2}$

$T = \frac{11Mg}{4} * \frac{2}{\sqrt{3} }$

$T= \frac{11}{2\sqrt{3} } Mg$

The horizontal force provided by the hinge is

$F_x= \frac{T}{2} ---(1)$

Now substituting for T

$F_{x} = \frac{11}{2\sqrt{3} } * \frac{1}{2}$

$Fx= \frac{11}{4\sqrt{3} } Mg$

4 0

3 years ago

If you pull up on a bucket with a tension force of 15 N and the bucket has a weight of 15 N, what is the net force acting on the

fredd [130]

Answer:

F = 0 [N]

Explanation:

To solve this problem we must perform a summation of forces in the direction of the vertical axis. Where the positive force is that of the tension of the upward force, while the force exerted by the weight is directed downward with a negative sign.

ΣF = 0

15 - 15 + F = 0

F = 0 [N]

3 0

2 years ago

An alternator consists of a coil of area A with N turns that rotates in a uniform field B around a diameter perpendicular to the

svet-max [94.6K]

Answer:

(a): emf = $\rm 2\pi f NBA\sin(2\pi ft).$

(b): Amplitude of alternating voltage = 20.942 Volts.

Explanation:

<u>Given:</u>

Area of the coil = A.
Number of turns of coil = N.
Magnetic field = B
Rotation frequency = f.

(a):

The magnetic flux through the coil is given by

$\phi = \vec B \cdot \vec A=BA\cos\theta$

where,

$\vec A$ = area vector of the coil directed along the normal to the plane of the coil.

$\theta$ = angle between $\vec B$ and $\vec A$ .

Assuming, the direction of magnetic field is along the normal to the plane of the coil initially.

At any time t, the angle which magnetic field makes with the normal to the plane of the coil is $2\pi ft$

Therefore, the magnetic flux linked with the coil at any time t is given by

$\phi(t) = NBA\cos(2\pi ft)$

According to Faraday's law of electromagnetic induction, the emf induced in the coil is given by

$e=-\dfrac{d\phi}{dt}\\=-\dfrac{d(NBA\cos(2\pi ft))}{dt}\\=-NBA(-2\pi f\sin(2\pi ft))\\=2\pi f NBA\sin(2\pi ft).$

(b):

The amplitude of the alternating voltage is the maximum value of the emf and emf is maximum when $\sin(2\pi ft)=1.$

Therefore, the amplitude of the alternating voltage is given by

$e_o = 2\pi ft NBA.$

We have,

$N=100\\A=10^{-2}\ m^2\\B=0.1\ T\\f=2000\ rev/ min = 2000\times \dfrac{1}{60}\ rev/sec=33.33\ rev/sec.$

Putting all these values,

$e_o = 2\pi \times 33.33\times 100\times 0.1\times 10^{-2}=20.942\ Volts.$

7 0

3 years ago

A metal and a non-metal typically form covalent compounds.<br>True<br>False

alexandr1967 [171]

Answer:

That is true. They share atoms with each other. I hope this helps. Comment if you have any question

Explanation:

4 0

3 years ago

Read 2 more answers

Why might this cloud formation be termed the “Pillars of Creation"?

Oduvanchick [21]

Answer:

I think the answer might be A

Explanation:

because if its called Pillars creation then something important might be being born maybe

7 0

2 years ago

Read 2 more answers