Answer:
When the uneven burning of the fuel takes place due to the incorrect air/fuel mixture inside the engine cylinder, a knocking sound is observed. This is called as the engine knocking.
Explanation:
When the uneven burning of the fuel takes place due to the incorrect air/fuel mixture inside the engine cylinder, a knocking sound is observed. This is called as the engine knocking.
The engine knock problem can be caused due to the following reason
a) When the octane rating of the fuel used is low.
b) The deposition of the carbon around the cylinder walls takes place.
c) The spark plug used in the vehicle is not correct.
Answer:
6.99 x 10⁻³ m³ / s
Explanation:
Th e pressure difference at the two ends of the delivery pipe due to atmospheric pressure and water column will cause flow of water.
h = difference in the height of water column at two ends of delivery pipe
6 - 1 = 5 m
Velocity of flow of water
v = √2gh
= √ (2 x 9.8 x 5)
= 9.9 m /s
Volume of water flowing per unit time
velocity x cross sectional area
= 9.9 x 3.14 x .015²
= 6.99 x 10⁻³ m³ / s
Answer:
<u>construction workers</u>
Explanation:
A construction worker is usually someone with the technical skills and abilities needed to manually construct physical infrastructures.
Since a walkway is an infrastructure, hiring skilled construction workers should perform the project of building the series of walkways within the large garden apartment.
Answer:
0.5m^2/Vs and 0.14m^2/Vs
Explanation:
To calculate the mobility of electron and mobility of hole for gallium antimonide we have,
(S)
Where
e= charge of electron
n= number of electrons
p= number of holes
mobility of electron
mobility of holes
electrical conductivity
Making the substitution in (S)
Mobility of electron
Mobility of hole in (S)
Then, solving the equation:
(1)
(2)
We have,
Mobility of electron 
Mobility of hole is 
Answer:
The three types of relearn procedures are auto relearn, stationary and OBD.
Explanation:
In TPMS system, after the direct service like adjustment of air pressure, tire rotation or replacement of sensors etc, is performed then maximum vehicle often needs TPMS system relearn that needs to be performed.
For performing these relearn procedure, there are mainly three types:
- auto relearn
- stationary relearn
- OBD
After applying the relearn process, the TPMS system will again be in proper function.
