Answer:
The process of producing electric energy or the amount of electric energy produced by transforming other forms of energy into electrical energy; commonly expressed in kilowatt-hours (kWh) or megawatt-hours (MWh). Electric power plant efficiency η is defined as the ratio between the useful electricity output from the generating unit, in a specific time, and the energy value of the energy source supplied to the unit in the same time period. For electricity generation based on steam turbines 65% of all prime energy is wasted as heat. The maximum theoretical energy efficiency is defined in more detail by the Rankine cycle. For modern practical systems this is about 40% but less for older generating plant. The efficiency falls still further if fuels with lower energy content such as biomass are used to supply the plant. The economics of power generation based on reciprocating engines depends to a large extent on the use to which the engine is to be put. The cheapest engines available are small petrol-driven engines based on car engines, which are manufactured in large numbers each year.
Explanation:
Answer:
Od- Wooden
Explanation:
It would not make sense if it was non-wood because that make it no a wood base product, OC is not right because its not a a plant that produces wood as its structural tissue and thus has a hard stem. An OA justT o take or get a supply of wood. so its Od
Answer:
F = 22.75 lb
μ₁ = 0.15
Explanation:
The smallest force required to move the dresser must be equal to the force of friction between the man and the dresser. Therefore,
F = μR
F = μW
where,
F = Smallest force needed to move dresser = ?
μ = coefficient of static friction = 0.25
W = Weight of dresser = 91 lb
Therefore,
F = (0.25)(91 lb)
<u>F = 22.75 lb</u>
<u></u>
Now, for the coefficient of static friction between shoes and floor, we use the same formula but with the mas of the man:
F = μ₁W₁
where,
μ₁ = coefficient of static friction between shoes and floor
W₁ = Weight of man = 151 lb
Therefore,
22.75 lb = μ₁ (151 lb)
μ₁ = 22.75 lb/151 lb
<u>μ₁ = 0.15</u>
Given :
The light rays in the incident ray originate at 20º from the surface.
To Find :
The angle for the incident ray.
Solution :
We know angle of incidence is measured from perpendicular to the surface .
So,
Now, we know by law of reflection :
Angle of reflection = Angle of incident
Therefore, the angle of incident and reflection is 70° each.
