Answer:
Magnitude of velocity=10.67 m/s
Magnitude of acceleration=24.62 ft/
Explanation:
The solution of the problem is given in the attachments
An effect might be a customer not wanting to buy it specifically because it’s by an airport, or maybe the customer wants to buy it because it’s right next to the airport, and a lot of people go to the airport so therefore they might go to the building next to the airport.
Batter boards (or battre boards, Sometimes mispronounced as "battle boads") are temporary frames, set beyond the corners of a planned foundation at precise elevations. These batter boards are then used to hold layout lines (construction twine) to indicate the limits (edges and corners) of the foundation.
Answer:
The diameter is 50mm
Explanation:
The answer is in two stages. At first the torque (or twisting moment) acting on the shaft and needed to transmit the power needs to be calculated. Then the diameter of the shaft can be obtained using another equation that involves the torque obtained above.
T=(P×60)/(2×pi×N)
T is the Torque
P is the the power to be transmitted by the shaft; 40kW or 40×10³W
pi=3.142
N is the speed of the shaft; 250rpm
T=(40×10³×60)/(2×3.142×250)
T=1527.689Nm
Diameter of a shaft can be obtained from the formula
T=(pi × SS ×d³)/16
Where
SS is the allowable shear stress; 70MPa or 70×10⁶Pa
d is the diameter of the shaft
Making d the subject of the formula
d= cubroot[(T×16)/(pi×SS)]
d=cubroot[(1527.689×16)/(3.142×70×10⁶)]
d=0.04808m or 48.1mm approx 50mm