All categories

3 years ago

You can formulate a medical term, which is easy to pronounce by combing the root with a .

Physics

1 answer:

aksik [14]3 years ago

7 0

Answer:

Electrocardiogram

Explanation:

Electrocardiogram is a medical term, which is easy to pronounce by combining the root with a.

You might be interested in

Three kids are riding on a snow sled traveling horizontally without friction at 19.8 m/s. The masses of Kid A, B, and C are 42.8

Kamila [148]

Answer:

34.6 m/s

Explanation:

From conservation of momentum, the sum of initial and final momentum are equal. Momentum is a product of mass and velocity. Initial mass will be 42.8+31.5+25.9=100.2 kg

Final mass will be 31.5+25.9=57.4 kg

From formula of momentum

M1v1=m2v2

Making v2 the subject of the formula then

$V2=\frac {M1v1}{m2}$

Substitute 100.2 kg for M1, 19.8 m/s fkr v1 and 57.4 kg for m2 then

$V2=\frac {100.2 kg\times 19.8 m/s}{57.4 kg}=34.56376 m/s\approx 34.6 m/s$

4 0

3 years ago

A cylindrical resistor element on a circuit board dissipates 1.2 W of power. The resistor is 2 cm long, and has a diameter of 0.

34kurt

Answer:

(a) The resistor disspates 103680 joules during a 24-hour period.

(b) The heat flux of the resistor is approximately 4340.589 watts per square meter.

(c) The fraction of heat dissipated from the top and bottom surfaces is 0.045.

Explanation:

(a) The amount of heat dissipated ( $Q$ ), measured in joules, by the cylindrical resistor is the power multiplied by operation time ( $\Delta t$ ), measured in hours. That is:

$Q = \dot Q \cdot \Delta t$ (1)

If we know that $\dot Q = 1.2\,W$ and $\Delta t = 86400\,s$ , then the amount of heat dissipated by the resistor is:

$Q = (1.2\,W)\cdot (86400\,s)$

$Q = 103680\,J$

The resistor disspates 103680 joules during a 24-hour period.

(b) The heat flux ( $Q'$ ), measured in watts per square meter, is the heat transfer rate divided by the area of the cylinder ( $A$ ), measured in square meters:

$Q' = \frac{\dot Q}{A}$ (2)

$Q' = \frac{\dot Q}{\frac{\pi}{2}\cdot D^{2}+\pi\cdot D \cdot h }$ (3)

Where:

$D$ - Diameter, measured in meters.

$h$ - Length, measured in meters.

If we know that $\dot Q = 1.2\,W$ , $D = 4\times 10^{-3}\,m$ and $h = 2\times 10^{-2}\,m$ , the heat flux of the resistor is:

$Q' = \frac{1.2\,W}{\frac{\pi}{2}\cdot (4\times 10^{-3}\,m)^{2}+\pi\cdot (4\times 10^{-3}\,m)\cdot (2\times 10^{-2}\,m) }$

$Q' \approx 4340.589\,\frac{W}{m^{2}}$

The heat flux of the resistor is approximately 4340.589 watts per square meter.

(c) Since heat is uniformly transfered, then the fraction of heat dissipated from the top and bottom surfaces ( $r$ ), no unit, is the ratio of the top and bottom surfaces to total surface: