All categories

3 years ago

¿cómo actuarías con una decisión no programada?

Engineering

1 answer:

kipiarov [429]3 years ago

4 0

Answer:

No tomaré la decisión no programada directamente.

Explicación:

No tomaré la decisión no programada directamente. Primero buscaré y pensaré en diferentes aspectos de la decisión no programada para protegerme de sus efectos adversos. Tomar decisiones no programadas directamente sin pensar puede perjudicar en gran medida nuestros objetivos, por lo que pensar antes de tomar una decisión no programada es la mejor manera de protegernos de problemas y problemas en nuestra vida profesional y personal.

You might be interested in

A boy weighing 108-lb starts from rest at the bottom A of a 6-percent incline and increases his speed at a constant rate to 7 mi

baherus [9]

Answer:

88.18 W

Explanation:

The weight of the boy is given as 108 lb

Change to kg =108*0.453592= 48.988 kg = 49 kg

The slope is given as 6% , change it to degrees as

6/100 =0.06

tan⁻(0.06)= 3.43°

The boy is travelling at a constant speed up the slope = 7mi/hr

Change 7 mi/h to m/s

7*0.44704 =3.13 m/s

Formula for power P=F*v where

P=power output

F=force

v=velocity

Finding force

F=m*g*sin 3.43°

F=49*9.81*sin 3.43° =28.17

Finding the power out

P=28.17*3.13 =88.18 W

4 0

4 years ago

Find a negative feedback controller with at least two tunable gains that (1) results in zero steady state error when the input i

IceJOKER [234]

Answer:

Gc(s) = $\frac{0.1s + 0.28727}{s}$

Explanation:

comparing the standard approximation with the plot attached we can tune the PI gains so that the desired response is obtained. this is because the time requirement of the setting is met while the %OS requirement is not achieved instead a 12% OS is seen from the plot.

attached is the detailed solution and the plot in Matlab

8 0

4 years ago

1. A thin plate of a ceramic material with E = 225 GPa is loaded in tension, developing a stress of 450 MPa. Is the specimen lik

mina [271]

Answer:

fracture will occur as the value is less than E/10 (= 22.5)

Explanation:

If the maximum strength at tip Is greater than theoretical fracture strength value then fracture will occur and if the maximum strength is lower than theoretical fracture strength then no fracture will occur.

$\sigma_m = 2\sigma_o [\frac{a}{\rho_t}]^{1/2}$

$= 2\times 750 (\frac{\frac{0.2mm}{2}}{0.001 mm}})^{1/2}$

= 15 GPa

fracture will occur as the value is less than E/10 = 22.5

7 0

3 years ago

Suppose a person (height of 1.8 m) walks in a room installed with a pyroelectric infrared (PIR) motion detector. The distance be

3241004551 [841]

Answer: b is your best option

Explanation:

8 0

4 years ago

Will Give Brainliest

Tom [10]

Answer:

A hole within a hole

Explanation:

8 0

3 years ago

¿cómo actuarías con una decisión no programada?​

¿cómo actuarías con una decisión no programada?