Hello,
The answer is option C "<span>thermosphere".</span><span>
Reason:
The troposphere is the layer of the air that the harmful heat rays (from the sun is mostly absorbed). The thermosphere is directly above the exosphere which is the sphere with the thin layer of the sphere therefore the answer should be option C.
If you need anymore help feel free to ask me!
Hope this helps!
~Nonportrit</span>
Answer:
Therefore,
a)
b) I₂ = 2.55 Ampere
c) Power = 30.6 Watts
d) R₁ = 470.58 ohms.
Explanation:
Given:
Let the primary voltage be,
Secondary Voltage,
Secondary Resistance,
To Find:
a)
b) I₂ = ?
c) Power = ?
d) R₁ = ?
Solution:
The ratio of primary to secondary turns of the transformer, is the ratio of primary to secondary Voltage and is given by,
Substituting the values we get
For, rms current for the secondary supply,
Substituting the values we get
Now for average power at load,
Substituting the values we get
Now for resistance connected directly across the source line Power will remain same,
Substituting the values we get
Therefore,
a)
b) I₂ = 2.55 Ampere
c) Power = 30.6 Watts
d) R₁ = 470.58 ohms.
Answer:
D . 1.47 x 10⁻² Ω-m
Explanation:
L = length of the cylindrical resistor = 2 m
d = diameter = 0.1 m
A = Area of cross-section of the resistor = (0.25) d² = (0.25) (3.14) (0.1)² = 0.785 x 10⁻² m²
V = battery Voltage = 12 volts
= current flowing through the resistor = 3.2 A
R = resistance of the resistor
Resistance of the resistor is given as
R = 3.75 Ω
= resistivity
Resistance is also given as
= 1.47 x 10⁻² Ω-m
Answer:
B. Strength
Explanation:
The OPT Model, or Optimum Performance Training Model, is a "fitness training system created by the NASM. The OPT Model is contructed with scientific evidence and principles that progresses an individual through five training phases: stabilization endurance, strength endurance, hypertrophy, maximal strength and power".
On the stabilization level we have the phase 1 called stabilization endurance.
For the level strength part we have 3 phases . Phase 2: Strength endurance , Phase 3: Hypertrophy, Phase 4: Maximal strength. And we can consider the case "A seated cable row" on this the level strength since we need to have some abilities to do this but not enough to stay on the power level since this one is the advancd level.
For the power level we have the last phase called power in order to mantain and conduct high training level programs.