Lauren rode the bus home from the mall on Saturday. She felt the bus accelerate as it left the parking lot, and then the bus tur
1 answer:
You might be interested in
(a) Because the tension in the rope would be larger than the maximum value allowed
When you are sliding down the slope, there are two forces acting on you:
- Your weight, , acting downward, where
m = 70 kg is your mass
g = 9.8 m/s^2 is the acceleration of gravity
- The tension in the rope, T, acting upward
Therefore, the equation of motion is
where a is the acceleration.
If you want to slide at constant speed, then the acceleration must be zero:
And so the equation becomes
This means that the tension in the rope must be:
Which is larger than the maximum tension allowed in the rope (500 N), so the rope will break.
(b) downward
Again, we must refer to the equation of the forces:
In this case, we want the tension in the rope to be the maximum allowed value,
T = 500 N
the other data are
m = 70 kg is your mass
g = 9.8 m/s^2 is the acceleration of gravity
Substituting into the equation, we can find the corresponding value of acceleration:
where the negative sign means the acceleration is downward.
Answer:
b. 5.6 mA
Explanation:
As the voltmeter is connected to the resistor in parallel. The new resistance of the systems is
R = 1/0.0214 = 46.78 Ω
The voltage is
So the new current now of the system is
So about 1.2056 - 1.2 = 0.0056 A or 5.6mA is drawn away.