All categories

3 years ago

What are some things that the outer planets have in common?

Physics

2 answers:

olga nikolaevna [1]3 years ago

3 0

Answer:

there round that's one thing

andrezito [222]3 years ago

3 0

Answer:

large size, number of moons, lack solid surfaces and none are capable of supporting life.

Explanation:

You might be interested in

A certain resistor dissipates 0.5 W when connected to a 3 V potential difference. When connected to a 1 V potential difference,

Stels [109]

Answer:

Explanation:

$Power = IV$

From ohms law we know that

$V= IR\\\\I= \frac{V}{R} \\\\Power= \frac{V}{R}*V\\\\Power= \frac{V^2}{R}$

Given data

P1 = 0.5 Watt

P2 = ?

V1= 3 Volts

V2= 1 Volt

Thus we can solve for the power dissipated as follows

$P1= \frac{V1^2}{R1}\\\\P2= \frac{V2^2}{R2}$

$\frac{P1}{P2} = \frac{V1^2}{V2^2}\\\\ P2=\frac{ V2^2}{ V1^2} *P1\\\\ P2=\frac{ 1^2}{ 3^2} *0.5= 0.055= 0.056 W$

<em>The resistor will dissipate 0.056 Watt</em>

7 0

3 years ago

Which takes place as water cycles from the bottom of the pot toward the top?

Elenna [48]

The option that takes place as water cycles from the bottom of the pot toward the top is that A. thermal energy is transferred.
As the pot gets warmer and warmer, the heat flows everywhere inside the pot, ultimately reaching the top, and heating the water at the top as well. There is no chemical energy here, and molecules don't gain thermal energy, it is just transferred to the top of the pot.

8 0

3 years ago

Read 2 more answers

6. Dentists use a soft, clay-like material to make a filling for a cavity. The filling stays soft under the

Mice21 [21]

Answer:

Ultraviolet light is a stronger type of light. The light the dentist uses is a softer light that is just used to help you see.

Explanation:

6 0

3 years ago

During fabrication processes, polymeric materials are generally subjected to which of the following conditions? The ambient temp

geniusboy [140]

Answer:

- Elevated temperatures.

- Elevated pressures.

Explanation:

In the manufacture of plastic products are used:

Raw material (pellets) which are the monomers that promote the chemical reaction.

To these are added the charges, in order to reduce the cost of the final product and improve some properties. These charges can be fiberglass, paper, metal structures.

Additives are also added whose mission is to improve or achieve certain properties, such as reducing friction, reducing chemical degradation, increasing electrical conductivity, coloring the product, and all this happens in the presence of a catalyst that is responsible for initiating and accelerating the chemical reaction process.

There are different methods of production of plastics, one of the most frequent is by injection.

Injection is a process that is carried out on machines similar to extrusion machines, in which the spindle, in addition to rotating, has an axial displacement.

In the injection, once the mold is filled, it is separated from the nozzle of the machine, breaking the feed channel. After a certain time, the piece already cooled is demoulded.

High pressures and temperatures are necessary, but parts of good finish and at high production speeds are obtained

3 0

4 years ago

Each driver has mass 79.0 kg. Including the masses of the drivers, the total masses of the vehicles are 800 kg for the car and 4

Mademuasel [1]

Answer:

Force exerted on the car driver by the seatbelt = 8139.4 N = 8.14 kN

Force exerted on the truck driver by the seatbelt = 1628.2 N = 1.63 kN

It is evident that the driver of the smaller vehicle has it worse. The car driver is in way more danger in this perfectly inelastic head-on collision with a bigger vehicle (the truck).

Explanation:

First of, we calculate the velocity of the vehicles after collision using the law of conservation of Momentum

Momentum before collision = Momentum after collision

Since the collision of the two vehicles was described as a head-on collision, for the sake of consistent convention, we will take the direction of the velocity of the bigger vehicle (the truck) as the positive direction and the direction of the car's velocity automatically is the negative direction.

Velocity of the truck before collision = 6.80 m/s

Velocity of the car before collision = -6.80 m/s

Let the velocity of the inelastic unit of vehicles after collision be v

Momentum before collision = (4000)(6.80) + (800)(-6.80) = 27200 - 5440 = 21,760 kgm/s

Momentum after collision = (4000 + 800)(v) = (4800v) kgm/s

Momentum before collision = Momentum after collision

21760 = 4800v

v = (21760/4800)

v = 4.533 m/s (in the direction of the big vehicle (the truck)

So, we then apply Newton's second law of motion which explains that the magnitude change in momentum is equal to the magnitude of impulse.

|Impulse| = |Change in momentum|

But Impulse = (Force exerted on each driver by the seatbelt) × (collision time) = (F×t)

Change in momentum = (Momentum after collision) - (Momentum before collision)

So, for the driver of the truck

Initial velocity = 6.80 m/s (the driver moves with the velocity of the truck)

Final velocity = 4.533 m/s

Change in momentum of the truck driver = (79)(6.80) - (79)(4.533) = 179.1 kgm/s

(F×t) = 179.1

F × 0.110 = 179.1

F = (179.1/0.11)

F = 1628.2 N = 1.63 kN

So, for the driver of the car

Initial velocity = -6.80 m/s (the driver moves with the velocity of the car)

Final velocity = 4.533 m/s

Change in momentum of the car driver = (79)(-6.80) - (79)(4.533) = -895.3 kgm/s

(F×t) = |-895.3|

F × 0.110 = 895.3

F = (895.3/0.11)

F = 8139.4 N = 8.14 kN

Hope this Helps!!!

3 0

3 years ago