Answer:
(a) water height =408.66 in.
(b) mercury height=30.04 in.
Explanation:
Given: P=14.769 psi ( 1 psi= 6894.76 
)
we know that 
where 
h=height.
Given that P=14.769 psi ⇒P= 101828.6 7
(a) 
⇒101828.67=
=10.38 m
So water barometer will read 408.66 in. (1 m=39.37 in)
(b) 
=13600
So 101828.67=
=0.763 m
So mercury barometer will read 30.04 in.
Answer:
month = input("Input the month (e.g. January, February etc.): ")
day = int(input("Input the day: "))
if month in ('January', 'February', 'March'):
season = 'winter'
elif month in ('April', 'May', 'June'):
season = 'spring'
elif month in ('July', 'August', 'September'):
season = 'summer'
else:
season = 'autumn'
if (month == 'March') and (day > 19):
season = 'spring'
elif (month == 'June') and (day > 20):
season = 'summer'
elif (month == 'September') and (day > 21):
season = 'autumn'
elif (month == 'December') and (day > 20):
season = 'winter'
print("Season is",season)
Explanation:
Answer:
Ammonia gas a hazardous gas to our health, when we are exposed to it for a long time. The gas is lighter than air, that means it's high concentration may not be noticed at the point of leakage, because it flows with the wind direction. Ammonia gas detector are used to determine the concentration of the gas at a particular place. We can use the dispersion modelling software program to know the exact position, where we can place the gas detector, which would be where evacuation is needed.
During evacuation, when the concentration of the gas has increased, a self-contained breathing apparatus should be used for breathing, and an encapsulated suit should be worn to prevent ammonia from reacting with our sweat or any other chemical burn. A mechanic ventilation will also be needed in the place of evacuation, so that the ammonia concentration in that area can be dispersed.
Answer:
7.94 ft^3/ s.
Explanation:
So, we are given that the '''model will be 1/6 scale (the modeled valve will be 1/6 the size of the prototype valve)'' and the prototype flow rate is to be 700 ft3 /s. Then, we are asked to look for or calculate or determine the value for the model flow rate.
Note that we are to use Reynolds scaling for the velocity as par the instruction from the question above.
Therefore; kp/ks = 1/6.
Hs= 700 ft3 /s and the formula for the Reynolds scaling => Hp/Hs = (kp/ks)^2.5.
Reynolds scaling==> Hp/ 700 = (1/6)^2.5.
= 7.94 ft^3/ s
