Answer:
The answer is below
Explanation:
The separation technique is used for separating immiscible liquids.
When separating, the stopper has to be removed when draining the lower layer so as to prevent a vacuum. If vacuum is allowed, the draining rate will reduce and stop.
The liquid should be mixed by shaking the funnel and then opening the stopcock so as the vent out gases.
When near interface between the layers, you should set your eye level so that you do not drain up to the second layer.
After completely draining the first layer, the second layer should be collected in a new flask.
After mixing the solutions in a separatory funnel, the stopper should be removed and the liquid should be mixed thoroughly and the layers allowed to separate. When you get close to the interface between the layers, get eye level with the funnel and slow the draining until the first layer is collected. Switch to a new flask to collect the second layer.
Answer:
tri
Explanation:
1-nothing
2-di
3-tri
- Hope that helps! Please let me know if you need further explanation.
The formula for kinetic energy is KE=1/2(mv²). Since both mass and velocity are multiplied by each other, particle with a larger mass needs to be moving slower than a particle with less mass if both have the same kinetic energy. You can think of it as 2KE/m=v² or 2KE/v²=m, If you increase the mass the velocity needs to decrease to keep the same KE value.
I hope this helps. Let me know in the comments if anything is unclear.
I don’t see what you need help with but thanks:)
Yes it does, its derived from the greek name for beryl, or beryllo
