How could you increase the potential energy stored in a magnetic field?
1 answer:
You might be interested in
Answer:
1) f’₀ / f = 1.10, the relationship between the focal length (f'₀) and the distance to the retina (image) is given by the constructor's equation
2) the two diameters have the same order of magnitude and are very close to each other
Explanation:
You have some problems in the writing of your exercise, we will try to answer.
1) The equation to be used in geometric optics is the constructor equation
where p and q are the distance to the object and the image, respectively, f is the focal length
* For the normal eye and with presbyopia
the object is at infinity (p = inf) and the image is on the retina (q = 15 mm = 1.5 cm)
f'₀ = 1.5 cm
this is the focal length for this type of eye
* Eye with myopia
the distance to the object is p = 15 cm the distance to the image that is on the retina is q = 1.5 cm
1 / f = 1/15 + 1 / 1.5
1 / f = 0.733
f = 1.36 cm
this is the focal length for the myopic eye.
In general, the two focal lengths are related
f’₀ / f = 1.5 / 1.36
f’₀ / f = 1.10
The question of the relationship between the focal length (f'₀) and the distance to the retina (image) is given by the constructor's equation
2) For this second part we have a diffraction problem, the point diameter corresponds to the first zero of the diffraction pattern that is given by the expression for a linear slit
a sin θ= m λ
the first zero occurs for m = 1, as the angles are very small
tan θ = y / f = sin θ / cos θ
for some very small the cosine is 1
sin θ = y / f
where f is the distance of the lens (eye)
y / f = lam / a
in the case of the eye we have a circular slit, therefore the system must be solved in polar coordinates, giving a numerical factor
y / f = 1.22 λ / D
y = 1.22 λ f / D
where D is the diameter of the eye
D = 2R₀
D = 2 0.1
D = 0.2 cm
the eye has its highest sensitivity for lam = 550 10⁻⁹ m (green light), let's use this wavelength for the calculation
* normal eye
the focal length of the normal eye can be accommodated to give a focus on the immobile retian, so let's use the constructor equation
\frac{1}{f} = \frac{1}{p} + \frac{1}{q}
sustitute
= 0.7066
f = 1.415 cm
therefore the diffraction is
y = 1.22 550 10⁻⁹ 1.415 / 0.2
y = 4.75 10⁻⁶ m
this is the radius, the diffraction diameter is
d = 2y
d_normal = 9.49 10⁻⁶ m
* myopic eye
In the statement they indicate that the distance to the object is p = 15 cm, the retina is at the same distance, it does not move, q = 1.5 cm
= 0.733
f = 1.36 cm
diffraction is
y = 1.22 550 10-9 1.36 10-2 / 0.2 10--2
y = 4.56 10-6 m
the diffraction diameter is
d_myope = 2y
d_myope = 9.16 10-6 m
= 9.49 /9.16
\frac{d_{normal}}{d_{myope}} = 1.04
we can see that the two diameters have the same order of magnitude and are very close to each other
Answer:
Thus, if field were sampled at same distance, the field due to short wire is greater than field due to long wire.
Explanation:
The magnetic field, B of long straight wire can be obtained by applying ampere's law
I is here current, and r's the distance from the wire to the field of measurement.
The magnetic field is obviously directly proportional to the current wire. From this expression.
As the resistance of the long cable is proportional to the cable length, the short cable becomes less resilient than the long cable, so going through the short cable (where filled with the same material) is a bigger amount of currents. If the field is measured at the same time, the field is therefore larger than the long wire because of the short wire.