All categories

3 years ago

Earthquakes Shaking of the ground Seismographs Scientific method

Physics

1 answer:

Free_Kalibri [48]3 years ago

3 0

Answer:

C. seismographs

Explanation:

Theirs another name for seismographs but c is correct

You might be interested in

Two equally charged, 2.807 g spheres are placed with 3.711 cm between their centers. When released, each begins to accelerate at

statuscvo [17]

$\begin{gathered} m=\text{ 2.807 g} \\ d=\text{ 3.711cm} \\ a=260.125\text{ m/s}^2 \\ m=\text{ mass of both the spheres} \\ d=\text{ distance between the centers of sphere.} \\ a=\text{ acceleration of spheres.} \end{gathered}$ $\begin{gathered} force\text{ due to the sphere having charge q, outside its surface is given by } \\ \vec{F}=\frac{1}{4\pi\epsilon_o}\frac{q_1q_2}{r^2}\hat{r} \\ q_1=charge\text{ on the source object.} \\ q_2=charge\text{ of the object in which we are observing the force.} \\ F=\text{ the force on the charged particle outside the sphere} \\ r=\text{ distance of the charged particle from the center of the sphere} \\ \hat{r}\text{= direction of the force acting on the charged particle} \end{gathered}$ $\begin{gathered} from\text{ Newton's second law} \\ F=ma \\ F=\text{ force acting on the particle.} \\ m=\text{ mass of the object.} \\ a=\text{ acceleration of the object.} \end{gathered}$ $\begin{gathered} from\text{ both the equation } \\ ma=\frac{1}{4\pi\epsilon_o}\frac{q_1q_{\frac{2}{}}}{r^2}\hat{r} \\ here\text{ q}_1\text{ and q}_2\text{ are the same, according to the question.} \end{gathered}$ $\begin{gathered} converting\text{ all the values in s.i. unit} \\ m=2.807*10^{-3}kg \\ d=3.711*10^{-2}m \\ according\text{ to the question q}_1=\text{ q}_2 \\ value\text{ of }\frac{1}{4\pi\epsilon_o}=9*10^9\text{ Nm}^2\text{/C}^2 \\ now\text{ put all the values in the above equation } \\ 2.807*10^{-3}kg*260.125\text{ m/s\textasciicircum2}=9*10^9Nm^2\text{/C}^2*\frac{q^2}{3.711*10^{-2}m} \\ \end{gathered}$ $\begin{gathered} by\text{ trasformation} \\ q=\sqrt{\frac{2.807*10^{-3}kg*260.125m/s^2*3.711*^10^{-2}m}{9*10^9Nm^2\text{/C}^2}} \\ by\text{ solving this we get } \\ q=17.3514*10^{-7}C \\ q=1.73514\text{ micro coulombs.} \end{gathered}$ Hence the correct answer is q= 1.73514 micro coulombs.

5 0

1 year ago

Water enters a cylindrical tank through two pipes at rates of 250 and 100 gal/min. If the level of the water in the tank remains

tester [92]

Answer:

The total amount of water that enters the tank is:

250 gal/min + 100 gal/min = 350gal/min.

Then, if the level of the water remains constant, this means that the water leaves the tank at a rate of 350gal/min.

We know that the diameter of the pipe is 8 inches, then the area of the pipe is:

A = pi*(d/2)^2 = 3.14*(4in)^2 = 50.24in^2

now, the flow can be calculated as:

Q = v*A = (velocity*area)

if we want to write our velocity in inches per minute, then we need to write the entering flow in cubic inches:

1 gallon = 231 in^3

then:

350gal/min = (350*231) in^3/min = 80,850 in^3/min.

Then the water that leaves the tank must be the same amoun, we have:

Q = 80,850 in^3/min. = v*A = v*50.24in^2

v = (80,850in^3/min)/50.24in^2 = 1609.3 in/min.

The velocity of the flow leaving the tank is 1609.3 in/min.

3 0

4 years ago

A 70 watt light bulb is run by a 120 v circuit. how many amps does it use

Marizza181 [45]

Current = Power/Voltage. 70W/120v= 0.583 Amps.

6 0

4 years ago

PLEASE HELP ASAP!!!!!

Damm [24]

I believe the answer is resonance

6 0

3 years ago

What's the formula for frequency?

Xelga [282]

Answer:

assuming ur speaking about chemistry

c=frequency×wavelength

energy=frequency×h

6 0

3 years ago