Answer:
See the explanation below
Explanation:
The pressure is defined as the product of the density of the liquid by the gravitational acceleration by the height, and can be easily calculated by means of the following equation.
where:
Ro = density of the fluid [kg/m³]
g = gravity acceleration = 9.81 [m/s²]
h = elevation [m]
In this way we can understand that the greater pressure is achieved by means of the height of the liquid, that is, as long as the fluid has more height, greater pressure will be achieved at the bottom.
Therefore in order of decreasing will be
The largest pressure with the largest height of the liquid, container B. The next is obtained with container D, the next with container A and the lowest pressure with container C.
The pressure decreases as we go from the container B - D - A - C
Answer:
At 100°C, the pH of pure water is 6.14. That is the neutral point on the pH scale at this higher temperature. A solution with a pH of 7 at this temperature is slightly alkaline because its pH is a bit higher than the neutral value of 6.14.
Explanation:
nonde
Answer:
10.2 Watt
Explanation:
= number of turns in flat coil = 160
= area = 0.20 m²
B₀= initial magnetic field = 0.40 T
= final magnetic field = - 0.40 T
Change in magnetic field is given as
ΔB = B - B₀ = - 0.40 - 0.40 = - 0.80 T
= time taken for the magnetic field to change = 2.0 s
Induced emf is given as
= 12.8 volts
= Resistance of the coil = 16 Ω
Power is given as
= 10.2 Watt
Answer:
The guitarist should increase the tension of the string.
Explanation:
The frequency of a vibrating string is determined by fn=(n/(2L))√T/μ. So if the tension in the string increased, the rate at which it vibrates (the frequency) will also increase.
Therefore it is advisable that she increase the tension of the string.
I hope it helps, please give brainliest if it does
