Answer:
n=2.32
w= -213.9 KW
Explanation:
Mass of air=1 kg
For polytropic process 
,n is the polytropic constant.
n=2.32
Work in polytropic process given as
w=
w=
Now by putting the values
w=
w= -213.9 KW
Negative sign indicates that work is given to the system or work is done on the system.
For T_V diagram
We can easily observe that when piston cylinder reach on new position then volume reduces and temperature increases,so we can say that this is compression process.
Answer:
C. 14.55
Explanation:
12 x 10 = 120
120 divded by 10 is 12
so now we do the left side
7 x 3 = 21 divded by 10 is 2
so now we have 14
and the remaning area is 0.55
so 14.55
Answer:
Ammonia gas a hazardous gas to our health, when we are exposed to it for a long time. The gas is lighter than air, that means it's high concentration may not be noticed at the point of leakage, because it flows with the wind direction. Ammonia gas detector are used to determine the concentration of the gas at a particular place. We can use the dispersion modelling software program to know the exact position, where we can place the gas detector, which would be where evacuation is needed.
During evacuation, when the concentration of the gas has increased, a self-contained breathing apparatus should be used for breathing, and an encapsulated suit should be worn to prevent ammonia from reacting with our sweat or any other chemical burn. A mechanic ventilation will also be needed in the place of evacuation, so that the ammonia concentration in that area can be dispersed.
Answer: General purpose branch circuit
Explanation:
General purpose branch circuit are the type of circuits that are used mainly to supply light to two or more receptacle outlets for small appliances. This circuits are about 120v can be used either in residential, commercial and industrial buildings.
