Answer:
yes bc it washed it away so
Explanation:
(:
Answer:
A. Technician A only
Explanation:
The camshaft opening ramp is what opens the valve, it starts at the basement of the inner circle and closes at the nose while the camshaft closing ramp allows for closing a valve starts at the nose and closes at the inner base circle. Valve clearance on an engine are performed when closing a valve, and is completed when the valve lifter or follower is on the inner base circle of the camshaft lobe.
The car is the heaviest object there and mass is proportional to force, meaning the heavier it is the bigger the force should be in order to move it.
At the top of the height, the velocity is zero and acceleration is negative of acceleration due to gravity ( i.e
).
The time of the ball in air is 3.2 s, so ascending time is
.
Therefore from kinematic equation,

Substituting the values we get,
, Here v = 0 at top.
Now from equation,
, here h is the height .
So,
.
Thus, the ball reached at its maximum height of 12.48 m.
Answer:
36 Ω
Explanation:
Since the 3 resistors are connected in parallel.
The combined resistance of the resistor is
1/Rc = 1/R + 1/R + 1/R ...................... Equation 1
Where Rc = combined resistance of the three resistor, R1 = Resistance of each of the resistor
Rc = R/3 ....................... Equation 2
The formula of power is given as
P = V²/Rc
Rc = V²/P ................ Equation 3
Where V = Voltage, R = Combined Resistance, P = power.
Given: V = 48 V, 192 W.
Substitute into equation 3
Rc = 48²/192
Rc = 12 Ω
From equation 2
Rc = R/3
R = 3Rc
Where Rc = 12 Ω
R = 3×12
R = 36 Ω
Hence the resistance on each resistor = 36 Ω