Compared to carbon nanotube, carbon nanofiber (CNF) is a unique quasi-one-dimensional nanostructure with a lot of edges and flaws (CNT). Additionally, their low cost and wide availability make them a valuable nanomaterial for upcoming technology.
<h3>what are the development and characterization of Carbon Nanofiber for Additively Manufactured Piezo resistive Sensors?</h3>
In accordance with the semiconductor material's piezo resistive effect, diffusion resistance is used to manufacture piezo resistive sensors on substrates of semiconductor materials. The diffusion resistor is connected in the substrate in the form of a bridge, allowing the substrate to be employed directly as a measuring sensor element.
- Carbon nanofiber/polylactic acid filament for fused filament fabrication (FFF) and additive manufacturing (AM) strain sensors was studied for the effects of production factors.
- To investigate the effects of CNF weight fraction, extrusion temperature, and number of extrusions on sensor performance, a design of experiments (DOE) approach was used. In the initial extrusion, dry melt mixing was used to combine CNFs and powdered PLA material.
- Through the DOE procedure, it was discovered that extruding CNF/PLA material for two complete extrusions at 185 °C resulted in material with material with material with dramatically improved electrical characteristics in comparison to unmodified material.
- Piezoresistive dog-bone shaped sensors were made using the best manufacturing technique using three different sizes of 5.0, 7.5, and 10.0 wt% CNF/PLA filament.
To know more about Carbon nanofiber/polylactic acid check here:brainly.com/question/15913091
#SPJ4
Answer:
-191.7°C
Explanation:
P . V = n . R . T
That's the Ideal Gases Law. It can be useful to solve the question.
We replace data:
2.5 atm . 8 L = 3 mol . 0.082 L.atm/mol.K . T°
(2.5 atm . 8 L) / (3 mol . 0.082 L.atm/mol.K) = T°
T° = 81.3 K
We convert T° from K to C°
81.3K - 273 = -191.7°C
Answer:
HNO₃.
Explanation:
- It is known that acids decrease the pH of the solution, while bases increase the pH of the solution.
So, HF and HNO₃ decrease the pH of the solution as they produce H⁺ in the solution.
While, KOH and NH₃ increase the pH of the solution as they produce OH⁻ in the solution.
HNO₃ will decrease the pH of the solution greater than HF.
- Because HNO₃ is strong acid that decomposes completely to produce H⁺ more than the same concentration of HF that is a weak acid which does not decomposed completely to produce H⁺.
Mixture. Distilled Water may be a pure substance, however, there are many minerals and such that are in tap water, making it a mixture.
