E. Parts they don’t resemble
Answer:
They find problems and solutions by working together
Explanation:
Answer:
The voltages of all nodes are, IE = 4.65 mA, IB =46.039μA, IC=4.6039 mA, VB = 10v, VE =10.7, Vc =4.6039 v
Explanation:
Solution
Given that:
V+ = 20v
Re = 2kΩ
Rc = 1kΩ
Now we will amke use of the method KVL in the loop.
= - Ve + IE . Re + VEB + VB = 0
Thus
IE = V+ -VEB -VB/Re
Which gives us the following:
IE = 20-0.7 - 10/2k
= 9.3/2k
so, IE = 4.65 mA
IB = IE/β +1 = 4.65 m /101
Thus,
IB = 0.046039 mA
IB = 46.039μA
IC =βIB
Now,
IC = 100 * 0.046039
IC is 4.6039 mA
Now,
VB = 10v
VE = VB + VEB
= 10 +0.7 = 10.7 v
So,
Vc =Ic . Rc = 4.6039 * 1k
=4.6039 v
Finally, this is the table summary from calculations carried out.
Summary Table
Parameters IE IC IB VE VB Vc
Unit mA mA μA V V V
Value 4.65 4.6039 46.039 10.7 10 4.6039
Answer:
Information such as tolerance and scale can be found in the <u>title block</u> of an engineering drawing
Explanation:
The title block of an engineering drawing can normally be found on the lower right and corner of an engineering drawing and it carries the information that are used to specify details that are specific the drawing including, the name of the project, the name of the designer, the name of the client, the sheet number, the drawing tolerance, the scale, the issue date, and other relevant information, required to link the drawing with the actual structure or item
to take a picture just choose “take photo” on the button next to the keypad, if you are on a computer it’s the same thing if your computer has a video screener or whatever they call it but if not I’m not sure, hope this helps!
