Answer:
The resistors will be in parallel to produce a net resistance of 4ohm and current in 20 ohm resistor will be 0.5A and 5ohm resistor will be 2A.
Explanation:
We are given 10 voltage power source and we have two Resistors with resistance of 20 ohm and 5ohm.
We need to find the orientation in which these two resistors would be arranged so that the circuit could get a current of 2.5Ampere.
Using ohm's law we have
V = I*R
V= voltage
I= current
R= resistance
10 = 2.5*R
R = 10/2.5 = 4ohm
that means we need a total of 4ohm resistance from these two resistors.
since the net Resistance(4ohm) is lower than the smallest resistance(5ohm) available that means the orientation of the resistors will be in parallel.

R(net) =4ohm
Now the orientation of the resistors are in parallel so the current will be divided.
we know that the current will divide in opposite manner the arm which provides more resistance less current will flow from there and vice versa.
We know that the voltage in parallel remains same
In 20 ohm resistance
again using ohms law
V = i1*R1
10 = i1*20
i1 = 0.5A
in 5ohm resistor
V=i2*R2
10 = I2*5
i2 =2A
and i1+i2 = 0.5+2= 2.5A which means our calculation is correct.
Therefore the resistors will be in parallel to produce a net resistance of 4ohm and current in 20 ohm resistor will be 0.5A and 5ohm resistor will be 2A.
I believe the answer is B.
Answer:
it holds the bone and helps to move
I don't know if this is right
Answer:
a) the magnitude of the force is
F= Q(
) and where k = 1/4πε₀
F = Qqs/4πε₀r³
b) the magnitude of the torque on the dipole
τ = Qqs/4πε₀r²
Explanation:
from coulomb's law
E = 
where k = 1/4πε₀
the expression of the electric field due to dipole at a distance r is
E(r) =
, where p = q × s
E(r) =
where r>>s
a) find the magnitude of force due to the dipole
F=QE
F= Q(
)
where k = 1/4πε₀
F = Qqs/4πε₀r³
b) b) magnitude of the torque(τ) on the dipole is dependent on the perpendicular forces
τ = F sinθ × s
θ = 90°
note: sin90° = 1
τ = F × r
recall F = Qqs/4πε₀r³
∴ τ = (Qqs/4πε₀r³) × r
τ = Qqs/4πε₀r²
Answer:
The intensity at 10° from the center is 3.06 × 10⁻⁴I₀
Explanation:
The intensity of light I = I₀(sinα/α)² where α = πasinθ/λ
I₀ = maximum intensity of light
a = slit width = 2.0 μm = 2.0 × 10⁻⁶ m
θ = angle at intensity point = 10°
λ = wavelength of light = 650 nm = 650 × 10⁻⁹ m
α = πasinθ/λ
= π(2.0 × 10⁻⁶ m)sin10°/650 × 10⁻⁹ m
= 1.0911/650 × 10³
= 0.001679 × 10³
= 1.679
Now, the intensity I is
I = I₀(sinα/α)²
= I₀(sin1.679/1.679)²
= I₀(0.0293/1.679)²
= 0.0175²I₀
= 0.0003063I₀
= 3.06 × 10⁻⁴I₀
So, the intensity at 10° from the center is 3.06 × 10⁻⁴I₀