Characteristics of 3 types of soil

What was the first roblox player A.bob B.roblox C.builderman

san4es73 [151]

Builderman is dksbdkbsnsbs

5 0

3 years ago

A distillation column is initially designed to separate a mixture of toluene and xylene at around ambient temperature (say, 100°

weeeeeb [17]

Answer:

Purchase cost= 87056

Bar module cost= 292725

Explanation:

solution is attached below

6 0

4 years ago

An iron-carbon alloy initially containing 0.286 wt% C is exposed to an oxygen-rich and virtually carbon-free atmosphere at 1200°

Fantom [35]

Answer:

Explanation:

Given data:

initial construction co = 0.286 wt %

concentration at surface position cs = 0 wt %

carbon concentration cx = 0.215 wt%

time = 7 hr

$D = 7.5 \times 10^{-11} m^2/s$

for 0.225% carbon concentration following formula is used

$\frac{cx -co}{cs -co} = 1 - erf(\frac{x}{2\sqrt{DT}})$

where, erf stand for error function

$\frac{cx -co}{cs -co} = \frac{0.215 -0.286}{0 -0.286} =0.248$

$0.248 = 1 - erf(\frac{x}{2\sqrt{DT}})$

$erf(\frac{x}{2\sqrt{DT}}) = 1 - 0.248$

$erf(\frac{x}{2\sqrt{DT}}) = 0.751$

from the table erf(Z) value = 0.751 lie between (z) = 0.80 and z = 0.85 so by inteerpolation we have z = 0.815

from given table

$\frac{x}{2\sqrt{DT}} = 0.815$

$x = 2\times 0.815 \times \sqrt{7.5 \times 10^{-11}\times (7\times 3600)$

$x = 2.39\times 10^{-3} m$

x = 0.002395 mm

8 0

3 years ago

Using an "AND" and an "OR", list all information (Equipment Number, Equipment Type, Seat Capacity, Fuel Capacity, and Miles per

Tomtit [17]

Answer:

Explanation :

The given information to be listed can are Equipment Number, Equipment Type, Seat Capacity, Fuel Capacity, and Miles per Gallon.

Check the attached document for the solution.

5 0

3 years ago

It is said that Archimedes discovered his principle during a bath while thinking about how he could determine if KingHiero‘s cro

Rudiy27

Answer:

the crown is false densty= 12556kg/m^3[/tex]

Explanation:

Hello! The first step to solve this problem is to find the mass of the crown, this is found using the weight of the crown in the air by means of the equation for the weight.

W=mg

W=weight(N)=31.4N

M=Mass

g=gravity=9.81m/S^2

solving for M

m=W/g

$m=\frac{31.4N}{9.81m/S^2}=3.2kg$

The second step is find the volume of crown remembering that when an object is weighed in the water the result is the subtraction between the weight of the object and the buoyant force of the water which is the product of the volume of the crown by gravity by density of water

$F=mg-\alpha V g$

Where

F=weight in water=28.9N

m=mass of crown=3.2kg

g=gravity=9.81m/S^2

α=density of water=1000kg/m^3

V= crown´s volume

solving for V

$V=\frac{mg-F }{g \alpha } =\frac{(3.2)(9.81)-28.9}{9.81(1000)} =0.000254m^3$

finally, we remember that the density is equal to the index between mass and volume

$\alpha =\frac{m}{v} =\frac{3.2}{0.000254} =12556kg/m^3$

To determine the density of the crown without using the weight in the water and with a bucket we can use the following steps.

1.weigh the crown in the air and find the mass

2. put water in a cylindrical bucket and measure its height with a ruler.

3. Put the crown in the bucket and measure the new water level with a ruler.

4. Subtract the heights, and find the volume of a cylinder knowing the difference in heights and the diameter of the bucket, in order to determine the volume of the crown.

5. find density by dividing mass by volume

7 0

3 years ago

Characteristics of 3 types of soil​

Characteristics of 3 types of soil