Answer:
The original length of the specimen is found to be 76.093 mm.
Explanation:
From the conservation of mass principal, we know that the volume of the specimen must remain constant. Therefore, comparing the volumes of both initial and final state as state 1 and state 2:
Initial Volume = Final Volume
πd1²L1/4 = πd2²L2/4
d1²L1 = d2²L2
L1 = d2²L2/d1²
where,
d1 = initial diameter = 19.636 mm
d2 = final diameter = 19.661 mm
L1 = Initial Length = Original Length = ?
L2 = Final Length = 75.9 mm
Therefore, using values:
L1 = (19.661 mm)²(75.9 mm)/(19.636 mm)²
<u>L1 = 76.093 mm</u>
Answer:
Explanation:
Given that:
V = 12.5m/s
L= 2.70m
b= 0.65m


P = 1atm
Film temperature

dynamic viscosity =

density = 0.9946kg/m³
Pr = 0.708564
K= 229.7984 * 10⁻³w/mk
Reynolds number,


we have,

we have,
heat transfer rate from top plate

Answer:
The answer is A. that is, a merchant account allows you to use SSL on your website.
Explanation:
SSL means Secure Sockets Layer and this is an encryption-based Internet security protocol.
For an e-commerce merchant website or account, it is advised that an SSL package be installed to prevent any potential loss of private information.
For this reason, a merchant account allows use of SSL on your website because this also boost the confidence of client and customers visiting the website to purchase products.
Answer:fall arrest harness
Explanation:cuz it’s just right
Answer:
Uair = 0.0749 KW/k = 74.9 W/k
Explanation:
The natural air change per hour is given by the formula:
Natural Air Change per Hour = ACPH = 60*Volume Flow/Volume
where,
ACPH = 0.4
Volume Flow = ? in ft³/min
Volume = 19456 ft³
Therefore,
0.4 = (60 min)(Volume Flow)/(19456 ft³)
Volume Flow = (0.4)(19456 ft³)/(60 min) = (129.7 ft³/min)(1 min/60 s)
Volume Flow = (2.16 ft³/s)(0.3048 m/1 ft)³ = 0.061 m³/s
Now, we find heat loss coefficient:
Uair = Volumetric Flow*Density of air*Specific Heat Capacity of air
Uair = (0.061 m³/s)(1.225 kg/m³)(1 KJ/kg.k)
<u>Uair = 0.0749 KW/k = 74.9 W/k</u>