Answer:
if they have the right equipment
Explanation:
Answer:
(B) FALSE
Explanation:
view factor
depends on the surface emissivity and the surface of geometry view factor is the term used in radiative heat transfer. View factor is depends upon the radiation which leave the surface and strike the surface.View factor is also called shape factor configuration factor it is denoted by 
Answer:
The heat loss rate through one of the windows made of polycarbonate is 252W. If the window is made of aerogel, the heat loss rate is 16.8W. If the window is made of soda-lime glass, the heat loss rate is 1190.4W.
The cost associated with the heat loss through the windows for an 8-hour flight is:
For aerogel windows: $17.472 (most efficient)
For polycarbonate windows: $262.08
For soda-lime glass windows: $1,238.016 (least efficient)
Explanation:
To calculate the heat loss rate through the window, we can use a model of heat transmission by conduction throw flat wall. Using unidimensional Fourier law:

In this case:

If we replace the data provided by the problem we get the heat loss rate through one of the windows of each material (we only have to change the thermal conductivities).
To obtain the thermal conductivity of the soda-lime glass we use the graphic attached to this answer (In this case for soda-lime glass k₃₀₀=0.992w/m·K).
To calculate the cost associated with the heat loss through the windows for an 8-hour flight we use this formula (using the heat loss rate calculated in each case):

Answer:
The couples are not all on one axis or plane for that matter but if the A and B connector had to be specified it would go by the yz axis diagonal to the x axis with a magnitude of about 15. The direction of the axis would be pointed up to the second quadrant. Hope this was helpful
Explanation: