Một vôn kế đang đo hiệu điện thế ở thang đo có giá trị mỗi độ chia là 0,1 V. Nếu kim chỉ thị nằm giữa vạch 5,5 V và 5,6 V thì đọ
1 answer:
You might be interested in
1. The magnitude of the magnetic field doubles
Explanation: the intensity of the magnetic field produced by a current-carrying wire is given by:
where is the vacuum permeability, I is the current in the wire, r is the distance from the wire.
As we see from the formula, the intensity of the magnetic field is directly proportional to the current: if the current increases from 5 A to 10 A, it means it doubles, so the magnetic field doubles as well.
2. The magnitude of the magnetic field halves
Explanation: the intensity of the magnetic field produced by a current-carrying wire is given by:
We see that the magnitude of the magnetic field is inversely proportional to the distance from the wire (r). In this case, the distance of the particle is changed from 10 cm to 20 cm, so it is doubled: therefore, the magnitude of the field will become half of the initial value.
3. The force reverses direction
Explanation: the force exerted on a charged particle in a magnetic field is:
where q is the charge, v is the speed of the particle, B is the magnetic field intensity and the angle between the direction of v and B. If the charge of the particle is switched from 2 µC to –2µC, the magnitude of the force does not change (because the absolute value of q does not change), however the charge q gets a negative sign (-), so the sign of the force changes and gets a negative sign too, so the force reverses direction.
Answer:
15.75 m
Explanation:
First, let's look at the top brick by itself. In order for it not to tip over the bottom brick, its center of gravity must be right at the edge of the bottom brick. So the edge of the top brick must be 10.5 m from the edge of the bottom brick.
Now let's look at both bricks as a combined mass. We know the total length of this combined brick is 10.5 m + 21 m = 31.5 m. And we know that for it to not tip over the edge of the surface, its center of gravity must be at the edge. So the edge of the combined brick must be 31.5 m / 2 = 15.75 m from the edge of the surface.
