Answer:
a cable -stayed bridge has, one or more towers,from which cable support the bridge deck.
Answer: 255
255 turns are required to create 25 ohms of secondary impedance.
Explanation:
Given that,
Number of turns in primary wire N₁ = 900
impedance on Primary wire Z₁ = 400 ohms
Number of turns in Secondary wire N₂ = ?
impedance on Secondary wire Z₂ = 25 ohms
we know that, the relationship between turn and impedance is
Zp / Zs = ( Np / Ns )²
(Primary impedance / secondary impedance) = Number of turns in primary wire / Number of turns in secondary wire)²
there fore
Z₁ / Z₂ = ( N₁ / N₂ )²
Now we substitute
( 400 / 25 ) = ( 900 / N₂ )²
400 / 25 = 900² / N₂²
we cross multiple to get our N₂
400 × N₂² = 900² × 25
N₂² = ( 900² × 25 ) / 400
N₂² = ( 810000 × 25 ) / 400
N₂² = 20250000 / 400
N₂² = 50625
N₂ = √50625
N₂ = 225
Therefore 255 turns are required to create 25 ohms of secondary impedance.
Answer:
بدلاً من ذلك يُشار إليه باسم مشاركة أو مشاركة شبكة ، الدليل المشترك هو دليل أو مجلد يمكن الوصول إليه من قبل العديد من المستخدمين على الشبكة. هذه هي الطريقة الأكثر شيوعًا للوصول إلى المعلومات ومشاركتها على شبكة محلية
Explanation:
Answer:
a) Δd(change in wood diameter) = 5%
b) The wood would swell since the moisture content is increasing which will also led to increase in the wood's diameter
C) new diameter (D2) = 10.5 in
Explanation:
Wood pole diameter = 10 inches
moisture content = 5%
FSP = 30%
A) The percentage change in the wood's diameter
note : moisture fluctuations from 5% to 30% causes dimensional changes in the wood but above 30% up to 55% causes no change. hence this formula can be used to calculate percentage change in the wood's diameter
Δd/d = 1/5(30 - 5)
Δd/d = 5%
Δd = 5%
B) would the wood swell or shrink
The wood would swell since the moisture content is increasing which will also led to increase in the wood's diameter
C) The new diameter of the wood
D2 = D + D(
)
D = initial diameter= 10 in , M1 = initial moisture content = 5%
therefore D2 = 10 + 10( 5/100 )
new diameter (D2) = 10.5 in