Answer:
a. V = 109.64 × 10⁵ ft/min
b. Mw = 654519.54 kg/hr
Explanation:
Given Parameters
mass flow rate of water, Mw = 90000g/min = 6607.33 kg/s
inlet temperature of water, T1 = 84 F = 28.89 C
outlet temperature of water, T2 = 68 F = 20 C
specific heat capacity of water, c = 4.18kJ/kgK
rate of heat remover from water, Qw is given by
Qw = 6607.33[28.89 - 20] * 4.18
Qw = 245529.545kw
For air, inlet condition
DBT = 70 F hi = 43.43 kJ/kg
WBT = 60 F wi = 0.00874 kJ/kg
u1 = 0.8445 m/kg
oulet condition,
DBT = 70 F RH = 100.1
h1 = 83.504kJ/kg
Wo = 0.222kJ/kg
check the attached file for complete solution
Answer:
Stress corrosion cracking
Explanation:
This occurs when susceptible materials subjected to an environment that causes cracking effect by the production of folds and tensile stress. This also depends upon the nature of the corrosive environment.
Factors like high-temperature water, along with Carbonization and chlorination, static stress, and material properties.
Answer:
False
Explanation:
MRK ME BRAINLIEST PLZZZZZZZZZZZZZZZZZZ
Answer:Discrete system are those system which change the state at the discrete point of time and continuous system are those which have state change at continuous period of time.
Explanation:
- The major difference between discrete and continuous system is that, discrete system has state change over a discontinuous time period whereas the change of state in continuous system is over a continuous time period .
- Variations can be found in the discrete system signal but in continuous system variation cannot be found input and output signal.
- Example:-
Discrete system:-employees reporting at office at different time like
9:10am, 9:15am etc
<u> Continuous system</u>:-the water flow over a dam in particular quantity
True .the chlorofluorocarbons also known as CFC’s also contribute on depleting the ozone layer
