All categories

3 years ago

Why is it important to have exact standards of measurement?

1 answer:

4 0

<span>If you mean having the same units used for measurement then it would be for the purpose of having an easier, faster and efficient understanding and communication of data in the scientific community.</span>

You might be interested in

What kind of small objects composes much of the universe?

Inga [223]

It’s atoms thank me later (give me brailiest)

7 0

3 years ago

In general, how did the water pressure in the tank change when mass was added to the fluid?

MissTica

Answer:

As the height increases the pressure must increase.

Explanation:

When we add masses to the fluid, the amount of fluid in the tank increases, therefore its height increases and the pressure is described by the expression

P = ρ g h

where rho is constant for a given fluid and h is the height measured from the surface of the fluid.

As the height increases the pressure must increase.

3 0

3 years ago

During a vaporization a substance changes from what to what

dusya [7]

A substance changes from liquid to gas

6 0

3 years ago

Read 2 more answers

An unstable particle at rest breaks up into two fragments of unequal mass. The mass of the lighter fragment is equal to 2.90 ✕ 1

motikmotik

Answer:

The speed of the heavier fragment is 0.335c.

Explanation:

Given that,

Mass of the lighter fragment $M_{l}=2.90\times10^{-28}\ kg$

Mass of the heavier fragment $M_{h}=1.62\times10^{-27}\ Kg$

Speed of lighter fragment = 0.893c

We need to calculate the speed of the heavier fragment

Let v is the speed of the second fragment after decay

Using conservation of relativistic momentum

$0=\drac{m_{1}v_{1}}{\sqrt{1-\dfrac{v_{1}^2}{c^2}}}-\drac{m_{2}v_{2}}{\sqrt{1-\dfrac{v_{1}^2}{c^2}}}$

$\drac{m_{1}v_{1}}{\sqrt{1-\dfrac{v_{1}^2}{c^2}}}=\drac{m_{2}v_{2}}{\sqrt{1-\dfrac{v_{1}^2}{c^2}}}$

$\dfrac{2.90\times10^{-28}\times0.893c}{\sqrt{1-(0.893)^2}}=\dfrac{1.62\times10^{-27}v_{2}}{\sqrt{1-\dfrac{v_{2}^2}{c^2}}}$

$\dfrac{v_{2}}{\sqrt{1-\dfrac{v_{2}^2}{c^2}}}=\dfrac{2.90\times10^{-28}\times0.893c}{1.62\times10^{-27}\times0.45}$

$\dfrac{v_{2}}{\sqrt{1-\dfrac{v_{2}^2}{c^2}}}=0.355c$

$\dfrac{v_{2}}{1-\dfrac{v_{2}^{2}}{c^2}}=(0.355c)^2$

$\dfrac{1-\dfrac{v_{2}^2}{c^2}}{v_{2}^2}=\dfrac{1}{(0.355c)}$

$\dfrac{1}{v_{2}^2}-\dfrac{1}{c^2}=\dfrac{1}{(0.355c)^2}$

$\dfrac{1}{v_{2}^2}=\dfrac{1}{c^2}+\dfrac{1}{0.126c^2}$

$\dfrac{1}{v_{2}^2}=\dfrac{1}{c^2}(1+\dfrac{1}{0.126})$

$\dfrac{1}{v_{2}^2}=\dfrac{8.93}{c^2}$

$v_{2}^2=\dfrac{c^2}{8.93}$

$v_{2}=0.335c$

Hence, The speed of the heavier fragment is 0.335c.

7 0

3 years ago

A hollow cylinder that is rolling without slipping is given a velocity of 5.0 m/s and rolls up an incline to a vertical height o

inysia [295]

Answer:

The hollow cylinder rolled up the inclined plane by 1.91 m

Explanation:

From the principle of conservation of mechanical energy, total kinetic energy = total potential energy

$M.E_T = \frac{1}{2}mv^2 + \frac{1}{2} I \omega^2 + mgh$

The total energy at the bottom of the inclined plane = total energy at the top of the inclined plane.

$\frac{1}{2}mv_i^2 + \frac{1}{2} I \omega_i^2 + mg(0) = \frac{1}{2}mv_f^2 + \frac{1}{2} I \omega_f^2 + mgh$

moment of inertia, I, of a hollow cylinder = ¹/₂mr²

substitute for I in the equation above;

$\frac{1}{2}mv_i^2 + \frac{1}{2} (\frac{1}{2}mr^2 \omega_i^2) = \frac{1}{2}mv_f^2 + \frac{1}{2} (\frac{1}{2}mr^2 \omega_f^2) + mgh\\\\ but \ v = r \omega\\\\\frac{1}{2}mv_i^2 + \frac{1}{2} (\frac{1}{2}m v_i^2 ) = \frac{1}{2}mv_f^2 + \frac{1}{2} (\frac{1}{2}m v_f^2) + mgh\\\\\frac{1}{2}mv_i^2 +\frac{1}{4}mv_i^2 = \frac{1}{2}mv_f^2 +\frac{1}{4}mv_f^2 +mgh\\\\\frac{3}{4}mv_i^2 = \frac{3}{4}mv_f^2 +mgh\\\\mgh = \frac{3}{4}mv_i^2 - \frac{3}{4}mv_f^2\\\\gh = \frac{3}{4}v_i^2 - \frac{3}{4}v_f^2\\\\$

$h = \frac{3}{4g}(v_1^2 -v_f^2)$

given;

v₁ = 5.0 m/s

vf = 0

g = 9.8 m/s²

$h = \frac{3}{4g}(v_1^2 -v_f^2) =\frac{3}{4*9.8}(5^2 -0) = 1.91 \ m$

Therefore, the hollow cylinder rolled up the inclined plane by 1.91 m

5 0

3 years ago