Answer:
Hello your question is incomplete attached below is the complete question
Answer : Factor of safety for point A :
i) using MSS
(Fos)MSS = 3.22
ii) using DE
(Fos)DE = 3.27
Factor of safety for point B
i) using MSS
(Fos)MSS = 3.04
ii) using DE
(Fos)DE = 3.604
Explanation:
Factor of safety for point A :
i) using MSS
(Fos)MSS = 3.22
ii) using DE
(Fos)DE = 3.27
Factor of safety for point B
i) using MSS
(Fos)MSS = 3.04
ii) using DE
(Fos)DE = 3.604
Attached below is the detailed solution
Answer:
The critical length of surface flaw = 6.176 mm
Explanation:
Given data-
Plane strain fracture toughness Kc = 29.6 MPa-m1/2
Yield Strength = 545 MPa
Design stress. =0.3 × yield strength
= 0.3 × 545
= 163.5 MPa
Dimensionless parameter. Y = 1.3
The critical length of surface flaw is given by
= 1/pi.(Plane strain fracture toughness /Dimensionless parameter× Design Stress)^2
Now putting values in above equation we get,
= 1/3.14( 29.6 / 1.3 × 163.5)^2
=6.176 × 10^-3 m
=6.176 mm
The future perfect tense forms are made by putting ‘will / shall + have’ before the past participle from the verb. these sentences can be changed into the passive if the active verb has an object
i hope this helps :D thanks
Answer:
True because he is working his arms to lift and hold the weight
Explanation:
