The degree is 4678% to pass theough all membranes.
<span>If you have only two
data from two recording stations then you will be having a hard time finding
the correct location of the epicenter. This is because triangulation method requires
3 recording station. If you have 2 recording station, the 2 circles will
intersect at 2 points giving you 2 locations that could possibly be the
epicenter.</span>
Answer:
The weight lifter would not get past this sticking point.
Explanation:
Generally torque applied on the weight is mathematically represented as
T = F z
To obtain Elbow torque we substitute 4000 N for F (the force ) and 2cm 
for z the perpendicular distance
So Elbow Torque is 
To obtain the torque required we substitute 300 N for F and 30cm 
So the Required Torque is 
Now since 
it mean that the weight lifter would not get past this sticking point
Answer:
160.75 N
Explanation:
The downward velocity has no effect on the force situation, it is only changes in velocity (plus, of course, gravity, which is always there) that require a force. At constant velocity, the bottom spring s_3 is supporting its mass m_3 to balance gravity.
As the elevator slows, though, it also ends up slowing down the spring arrangement, too. However, because the stretching takes time, it means that some damped harmonic motion will be set up in the spring chain.
When the motion has finally damped out, the net force the bottom spring s3 exerts on m3 has two components--that of gravity and of the deceleration of the elevator:
F_3net = m3 * (g + a) = 10.5×(9.81+5.5)= 10.5×15.31= 160.75 N
