Answer:
a) speed when Jack sees the pot : 12.92 meters per second
b) height difference 163.115 meters
Explanation:
First to calculate te initial speed we use the acceleration formula:
a= v1-v0/t
Acceleration being gravity's acceleration (9.8 m/s^2)
v1 being the speed when Jill sees the pot
v0 when Jack sees it
and t the time between
Solving for v0 it would be
v1 - a*t = v0
replacing
For the second question we use the position formula setting y0 and t0 as the position and time when jack sees the pot. (and setting the positive axis downward I.E. one meter below jack would be 1m not -1m)
The formula is
replacing
Answer:
True
Explanation:
When a ray travelling parallel to the principle axis of a concave mirror then the light ray reflect out through the mirrors and passing through the focus.
When a light ray travelling through focus of a concave mirror then after reflection the light ray reflect out through the mirror and go parallel to principle axis.
Therefore, rays travelling parallel to the principle axis of a concave mirror will reflect out through the mirrors focus.
It is true.
Answer: E = 941738.537J
Explanation:
to begin,
given that the mass = 2320 pound = 1052.334 kg
Δh = 110 ft = 33.528 m
given that distance (d) = 1283 ft = 391.058 m
also the speed (v) is 65 mph = 29.058 m/s
force (F) = 87 pounds = 386.995 N
from our knowledge in work energy theory;
E = Fd + 1/2mv² + mgh
E = (386.995 × 391.058) + (1/2×1052.334×29.058²) + (1052.334×9.81×33.528)
E = 151337.491 + 444278.2 + 346122.84
E = 941738.537J
i hope this helps, cheers.
this is an equation that you need to solve for motional emf. motional emf=vBL, where v is velocity in meters/second, B is magnetic field in Teslas and L is length or distance the rails are apart from each other. when we plug everything into the formula given above, we get: motional emf=5m/s*0.80T*0.20m. solving all this we get 0.8 volts. pretty sure that since they are giving you the direction of the field, they want to know which way the current will flow . since the conductor is moving from left to right the area of the field is increasing which means magnetic flux is increasing as Ф(magnetic flux)=B(magnetic field)*A(area)*cosФ(little phi is the angle to the normal. in this case little fee is 0 degrees so the cosФ doesn't matter). so ↑Ф=B↑A. if magnetic flux is increasing, the induced magnetic field is in the opposite direction as the original magnetic field meaning the induced magnetic field will be out of the page. using the right hand rule which says that if the field is in to the page, the current should go clockwise and if the field is out of the page, the current is counterclockwise so that means that the current should be going counter clockwise since the induced field is going out of the screen. the top of the conducting wire will have its current go to the left and the bottom of the conducting wire will have the current go to the right.
