True or false? two countermeasures to reducing risks are to reduce speed and apply time management.

Harlin is designing a new car engine that does not create pollution. Which technological design factor is probably the most

kari74 [83]

Answer: environmental impact

Explanation:

From the question, we are informed that Harlin is designing a new car engine that does not create pollution.

The technological design factor which is probably the most important for the design is the impact on the environment.

Pollution has a negative effect on the environment a d doing this shows that emphasis is placed on how the environmental issue of pollution can be tackled.

8 0

3 years ago

Question 1 A design team completes their high-fidelity prototype of a responsive website. Before they hand off designs to the en

MissTica

A question the design team should answer before handing off the designs is: are the designs a true representation of the intended end user experience?

<h3>What is a website?</h3>

A website can be defined as a collective name that is used to describe series of webpages that are interconnected or linked together with the same domain name.

In Computer technology, the main goal of a high-fidelity prototype is to understand how end users would interact with a website and areas to improve the design.

In conclusion, the design team should answer whether or not the designs are a true representation of the intended end user experience before handing off the designs.

Read more on website here: brainly.com/question/26324021

5 0

2 years ago

An electric motor is to be supported by four identical mounts. Each mount can be treated as a linear prevent problems due requir

Artyom0805 [142]

GIVEN:

Amplitude, A = 0.1mm

Force, F =1 N

mass of motor, m = 120 kg

operating speed, N = 720 rpm

$\frac{A}{F}$ = $\frac{0.1\times 10^{-3}}{1} = 0.1\times 10^{-3}$

Formula Used:

$A = \frac{F}{\sqrt{(K_{t} - m\omega ^{2}) +(\zeta \omega ^{2})}}$

Solution:

Let Stiffness be denoted by 'K' for each mounting, then for 4 mountings it is 4K

We know that:

$\omega = \frac{2 \pi\times N}{60}$

so,

$\omega = \frac{2 \pi\times 720}{60}$ = 75.39 rad/s

Using the given formula:

Damping is negligible, so, $\zeta = 0$

$\frac{A}{F}$ will give the tranfer function

Therefore,

$\frac{A}{F}$ = $\frac{1}{\sqrt{(4K - 120\ ^{2})}}$

$0.1\times 10^{-3}$ = $\frac{1}{\sqrt{(4K - 120\ ^{2})}}$

Required stiffness coefficient, K = 173009 N/m = 173.01 N/mm

8 0

3 years ago

Water at atmospheric pressure boils on the surface of a large horizontal copper tube. The heat flux is 90% of the critical value

masya89 [10]

Answer:

The tube surface temperature immediately after installation is 120.4°C and after prolonged service is 110.8°C

Explanation:

The properties of water at 100°C and 1 atm are:

pL = 957.9 kg/m³

pV = 0.596 kg/m³

ΔHL = 2257 kJ/kg

CpL = 4.217 kJ/kg K

uL = 279x10⁻⁶Ns/m²

KL = 0.68 W/m K

σ = 58.9x10³N/m

When the water boils on the surface its heat flux is:

$q=0.149h_{fg} \rho _{v} (\frac{\sigma (\rho _{L}-\rho _{v})}{\rho _{v}^{2} } )^{1/4} =0.149*2257*0.596*(\frac{58.9x10^{-3}*(957.9-0.596) }{0.596^{2} } )^{1/4} =18703.42W/m^{2}$

For copper-water, the properties are:

Cfg = 0.0128

The heat flux is:

qn = 0.9 * 18703.42 = 16833.078 W/m²

$q_{n} =uK(\frac{g(\rho_{L}-\rho _{v}) }{\sigma })^{1/2} (\frac{c_{pL}*deltaT }{c_{fg}h_{fg}Pr } \\16833.078=279x10^{-6} *2257x10^{3} (\frac{9.8*(957.9-0.596)}{0.596} )^{1/2} *(\frac{4.127x10^{3}*delta-T }{0.0128*2257x10^{3}*1.76 } )^{3} \\delta-T=20.4$

The tube surface temperature immediately after installation is:

Tinst = 100 + 20.4 = 120.4°C

For rough surfaces, Cfg = 0.0068. Using the same equation:

ΔT = 10.8°C

The tube surface temperature after prolonged service is:

Tprolo = 100 + 10.8 = 110.8°C

8 0

3 years ago

Provide an argument justifying the following claim: The average (as defined here) of two Java ints i and j is representable as a

ahrayia [7]

Answer:

public static int average(int j, int k) {

return (int)(( (long)(i) + (long)(j) ) /2 );

}

Explanation:

The above code returns the average of two integer variables

Line 1 of the code declares a method along with 2 variables

Method declared: average of integer data type

Variables: j and k of type integer, respectively

Line 2 calculates the average of the two variables and returns the value of the average.

The first of two integers to average is j

The second of two integers to average is k

The last parameter ensures average using (j+k)/2

3 0

3 years ago