10.34 Briefly describe the simplest heat treatment procedure that would be used in converting a 0.76 wt% C steel from one micros
tructure to the other, as follows: (a) Spheroidite to tempered martensite (b) Tempered martensite to pearlite (c) Bainite to martensite (d) Martensite to pearlite (e) Pearlite to tempered martensite (f) Tempered martensite to pearlite (g) Bainite to tempered martensite (h) Tempered martensite to spheroidite
1 answer:
You might be interested in
Answer and explanation:
The graphical representation of the electronic eye
The state table showing
the present state
input
Next state and
the output
are shown in the attached file
Answer:
6.37 inch
Explanation:
Thinking process:
We need to know the flow rate of the fluid through the cross sectional pipe. Let this rate be denoted by Q.
To determine the pressure drop in the pipe:
Using the Bernoulli equation for mass conservation:
thus
The largest pressure drop (P1-P2) will occur with the largest f, which occurs with the smallest Reynolds number, Re or the largest V.
Since the viscosity of the water increases with temperature decrease, we consider coldest case at T = 50⁰F
from the tables
Re= 2.01 × 10⁵
Hence, f = 0.018
Therefore, pressure drop, (P1-P2)/p = 2.70 ft
This occurs at ae presure change of 1.17 psi
Correlating with the chart, we find that the diameter will be D= 0.513
= <u>6.37 in Ans</u>