All categories

3 years ago

Mixing refrigerants can cause

Engineering

2 answers:

Gala2k [10]3 years ago

6 0

Answer:

When an alternative refrigerant is mixed with R-22, there is no pressure-temperature chart to refer to and therefore no way to optimize the system charge. Improper superheat or subcooling can lead to compressor floodback, overheating, and dramatically reduce system efficiency and compressor lifetime

Explanation:

Leno4ka [110]3 years ago

6 0

Answer: autism

Explanation:

You might be interested in

Careful planning will save time, __________, and energy while ensuring the production of a high quality product.

Svet_ta [14]

Juicers nb 345676 at that rate it will be amazing

5 0

2 years ago

One kilogram of water fills a 150-L rigid container at an initial pressure of 2 MPa. The container is then cooled to 40∘C. Deter

lukranit [14]

The pressure of water is 7.3851 kPa

<u>Explanation:</u>

Given data,

V = 150× $10^{-3}$ $m^{3}$

m = 1 Kg

$P_{1}$ = 2 MPa

$T_{2}$ = 40°C

The waters specific volume is calculated:

$v_{1}$ = V/m

Here, the waters specific volume at initial condition is $v_{1}$ , the containers volume is V, waters mass is m.

$v_{1}$ = 150× $10^{-3}$ $m^{3}$ /1

$v_{1}$ = 0.15 $m^{3}$ / Kg

The temperature from super heated water tables used in interpolation method between the lower and upper limit for the specific volume corresponds 0.15 $m^{3}$ / Kg and 0.13 $m^{3}$ / Kg.

$T_{1}$ = 350+(400-350) $\frac{0.15-0.13}{0.1522-0.1386}$

$T_{1}$ = 395.17°C

Hence, the initial temperature is 395.17°C.

The volume is constant in the rigid container.

$v_{2}$ = $v_{1}$ = 0.15 $m^{3}$ / Kg

In saturated water labels for $T_{2}$ = 40°C.

$v_{f}$ = 0.001008 $m^{3}$ / Kg

$v_{g}$ = 19.515 $m^{3}$ / Kg

The final state is two phase region $v_{f}$ < $v_{2}$ < $v_{g}$ .

In saturated water labels for $T_{2}$ = 40°C.

$P_{2}$ = $P_{Sat}$ = 7.3851 kPa

$P_{2}$ = 7.3851 kPa

7 0

3 years ago

Select the right answer<br>

Kruka [31]

Answer:

for 1st question the answer is 5th option.

for 2nd question the answer is 2nd option

hope it helps you mate

please mark me as brainliast

5 0

3 years ago

If the rotational speed of a pump motor is reduced by 35%, what is the effect on the pump performance in terms of capacity, head

FinnZ [79.3K]

Answer:

- the capacity of the pump reduces by 35%.

- the head gets reduced by 57%.

the power consumption by the pump is reduced by 72%

Explanation:

the pump capacity is related to the speed as speed is reduces by 35%

so new speed is (100 - 35) = 65% of orginal speed

speed Q ∝ N ⇒ Q1/Q2 = N1/N2

Q2 = (N2/N1)Q1

Q2 = (65/100)Q1

which means that the capacity of the pump is also reduces by 35%.

the head in a pump is related by

H ∝ N² ⇒ H1/H2 = N1²/N2²

H2 = (N2N1)²H1

H2 = (65/100)²H1 = 0.4225H1

so the head gets reduced by 1 - 0.4225 = 0.5775 which is 57%.

Now The power requirement of a pump is related as

P ∝ N³ ⇒ P1/P2 = N1³/N2³

P2 = (N2/N1)³P1

H2 = (65/100)²P1 = 0.274P1

So the reduction in power is 1 - 0.274 = 0.725 which is 72%

Therefore for a reduction of 35% of speed there is a reduction of 72% of the power consumption by the pump.

8 0

3 years ago

The elevation of the end of the steel beam supported by a concrete floor is adjusted by means of the steel wedges E and F. The b

Wewaii [24]

Answer:

a) P ≥ 22.164 Kips

b) Q = 5.4 Kips

Explanation:

GIven

W = 18 Kips

μ₁ = 0.30

μ₂ = 0.60

a) P = ?

We get F₁ and F₂ as follows:

F₁ = μ₁*W = 0.30*18 Kips = 5.4 Kips

F₂ = μ₂*Nef = 0.6*Nef

Then, we apply

∑Fy = 0 (+↑)

Nef*Cos 12º - F₂*Sin 12º = W

⇒ Nef*Cos 12º - (0.6*Nef)*Sin 12º = 18

⇒ Nef = 21.09 Kips

Wedge moves if

P ≥ F₁ + F₂*Cos 12º + Nef*Sin 12º

⇒ P ≥ 5.4 Kips + 0.6*21.09 Kips*Cos 12º + 21.09 Kips*Sin 12º

⇒ P ≥ 22.164 Kips

b) For the static equilibrium of base plate

Q = F₁ = 5.4 Kips

We can see the pic shown in order to understand the question.

7 0

3 years ago

Read 2 more answers