I dont know what the statements are but concave lens are thinner in the middle which cause light to diverge or scatter
Answer:
this measurement if feet is: 2.624672 ft
Explanation:
Notice that 80 cm can be expressed as 0.8 meters, and In order to convert from meters to feet, one needs to multiply the meter measurement times 3.28084. Therefore:
0.80 m can be written in feet as: 0.80 * 3.28084 feet = 2.624672 feet
Answer:
n = 1,875
Explanation:
The speed of light in vacuum is constant (c) and in a material medium it is
v = d / t
The refractive index of a material is defined by
n = c / v
Let's look for the speed of light in the material, in general the length that light travels is known, this value is high, x = 1, when we place a block on the road, a small amount is lengthened by the length of the block, which in general is despised
These measurements are made on a digital oscilloscope that allows to stop the signals and measure their differences, that is, the zero is taken when the first ray arrives and the time for the second ray is measured,
v = d / t
v = 1 / 6.25 10⁻⁹
v = 1.6 10⁸ m / s
we calculate the refractive index
n = 3 10⁸ / 1.6 10⁸
n = 1,875
Answer. dry friction- <span> resists relative lateral motion of two solid surfaces in contact.</span>
Answer:
Hi myself Shrushtee.
Explanation:
The fuse is connected to the live wire so that the appliance will not become charged (have a potential difference of 230 V) after the fuse has melted due to excessive current. Fuses must be fitted onto the live wire so that when it blows, it will disconnect (isolate) the appliance from the high voltage live wire.
