Answer: Because if something goes wrong while you are flying it it will crash
Explanation:
Answer:
Kinetic energy can be used to develop electric energy which can be used as electricity.
Explanation:
The kinetic energy can be harnessed; much like some hydro power technologies harness water movement. A way to convert this kinetic energy into electric energy is through piezoelectric. By applying a mechanical stress to a piezoelectric crystal or material an electric current will be created and can be harvested.
Kinetic energy is also generated by the human body when it is in motion. Studies have also been done using kinetic energy and then converting it to other types of energy, which is then used to power everything from flashlights to radios and more.
The brakes are being bled on a passenger vehicle with a disc/drum brake system is described in the following
Explanation:
1.Risk: Continued operation at or below Rotor Minimum Thickness can lead to Brake system failure. As the rotor reaches its minimum thickness, the braking distance increases, sometimes up to 4 meters. A brake system is designed to take kinetic energy and transfer it into heat energy.
2.Since the piston needs to be pushed back into the caliper in order to fit over the new pads, I do open the bleeder screw when pushing the piston back in. This does help prevent debris from traveling back through the system and contaminating the ABS sensors
3.There are three methods of bleeding brakes: Vacuum pumping. Pressure pumping. Pump and hold.
4,Brake drag is caused by the brake pads or shoes not releasing completely when the brake pedal is released. ... A worn or corroded master cylinder bore causes excess pedal effort resulting in dragging brakes. Brake Lines and Hoses: There may be pressure trapped in the brake line or hose after the pedal has been released.
Answer:
An oscilloscope display grid or scale is called a graticule.
Explanation: