Explanation:
Lasers produce a narrow beam of light in which all of the light waves have very similar wavelengths. The laser's light waves travel together with their peaks all lined up, or in phase. This is why laser beams are very narrow, very bright, and can be focused into a very tiny spot.
Answer:
C. you're able to reverse out of the parking spot
Explanation:
Straight-in parking is an approach of parking that allows a more flexible traffic layout where a driver can approach the spot from either direction and still safely park within the lines. It thus helps to prevent blockage of cars. Each car can move in and out freely preventing it from congestion.
This way of parking can leave you safe when you able to reverse out of the parking spot. It gives you greater control and makes it easier to maneuver out space. The benefits of Straight-in parking are,
- Allows for two-way traffic
- Drivers can line up the vehicle from multiple angles
- Saves time for drivers
Answer:
<em>To reverse the direction of an electric current, we simply reverse the voltage either automatically with the help of some switching circuitry or manually by changing the voltage source terminals connection. </em>
Explanation:
For electric current to flow, there must be a potential difference, usually referred to as the voltage. The electric current flow is analogous to the flow of water under the action of a pump, through a series of pipe connections. The voltage is similar to the driving action of the pump, and current flows the same way water flows. The resistance due to drag on the pipe wall is equivalent to electric resistance. For current to flow in the reverse direction, the voltage or rather, the potential difference is changed, causing the current to flow in the opposite direction. This can be done by switching the terminals of the voltage source, or by automatic means. The automatic switching can be done with a transistor based circuitry.
Answer:
527 Hz
Solution:
As per the question:
Beat frequency of the player, 
Frequency of the tuning fork, f = 523 Hz
Now,
The initial frequency can be calculated as:
when
when
But we know that as the length of the flute increases the frequency decreases
Hence, the initial frequency must be 527 Hz
