Answer:
=0.60
Explanation:
Given :Take
=1.4 for air

=r ⇒ r=16
As we know that

So 
=909.42K
Now find the cut off ration 



So efficiency of diesel engine

Now by putting the all values

So
=0.60
So the efficiency of diesel engine=0.60
Answer:
(a) ------(3). (b)------(1) (c)-----(5) (d)------(2) ------ (e) -----4
Note: Kindly find an attached copy of the diagram associated with the solution to the question below.
Sources: the diagram to this question was researched from Quizlet
Explanation:
Solution
(1) Part (a)a waveform has a high frequency components compared to another waveform. the corresponding frequency components should be high.
So for the wave form a the corresponding frequency spectrum is (3)
(2) For part (b), waveform has three harmonics, the corresponding frequency spectrum is (1)
(3) The time domain waveform plot (c) is a sine wave but there exists a dc component.
Thus x[0] ≠0
For (c) the corresponding frequency spectrum is (5)
(4) For part (d) the corresponding frequency spectrum is (2)
(5) A sine wave is made of a single frequency only and its spectrum is a single point
For (e) the corresponding frequency spectrum is (4)
Below is the program to separate odd and even numbers
<u>Explanation</u>:
<u>L1:</u>
mov ah,00
mov al,[BX]
mov dl,al
div dh
cmp ah,00
je EVEN1
mov [DI],dl
add OddAdd,dl
INC DI
INC BX
Loop L1
jmp CAL
<u>EVEN1:</u>
mov [SI],dl
add Even Add,dl
INC SI
INC BX
Loop L1
<u>CAL: </u>
mov ax,0000
mov bx,0000
mov al,OddAdd
mov bl,EvenAdd
MOV ax,4C00h
int 21h
end
The above program separates odd and even numbers from the array using 8086 microprocessor. It has odd numbers in 2000h and even numbers in 3000h.
Answer:
Option A
Explanation:
Nylon retainers are knocking screws that have nylon coating on their thread which prevents them from loosening. It generally has two heads Hex Key an star screw. For high mount fixing, star screw is used as it is less prone to stripping. The nylon insert of a Nylock nuts enters into the screw and prevent it from loosening. It is useful in areas where there is high vibration.
Hence, option A is correct