How would you handle a situation where another team member was critical of your work?

Steam at 4 MPa and 350°C is expanded in an adiabatic turbine to 125kPa. What is the isentropic efficiency (percent) of this turb

guajiro [1.7K]

Answer:

$\eta_{turbine} = 0.603 = 60.3\%$

Explanation:

First, we will find actual properties at given inlet and outlet states by the use of steam tables:

AT INLET:

At 4MPa and 350°C, from the superheated table:

h₁ = 3093.3 KJ/kg

s₁ = 6.5843 KJ/kg.K

AT OUTLET:

At P₂ = 125 KPa and steam is saturated in vapor state:

h₂ = $h_{g\ at\ 125KPa}$ = 2684.9 KJ/kg

Now, for the isentropic enthalpy, we have:

P₂ = 125 KPa and s₂ = s₁ = 6.5843 KJ/kg.K

Since s₂ is less than $s_g$ and greater than $s_f$ at 125 KPa. Therefore, the steam is in a saturated mixture state. So:

$x = \frac{s_2-s_f}{s_{fg}} \\\\x = \frac{6.5843\ KJ/kg.K - 1.3741\ KJ/kg.K}{5.91\ KJ/kg.K}\\\\x = 0.88$

Now, we will find $h_{2s}$ (enthalpy at the outlet for the isentropic process):

$h_{2s} = h_{f\ at\ 125KPa}+xh_{fg\ at\ 125KPa}\\\\h_{2s} = 444.36\ KJ/kg + (0.88)(2240.6\ KJ/kg)\\h_{2s} = 2416.088\ KJ/kg$

Now, the isentropic efficiency of the turbine can be given as follows:

$\eta_{turbine} = \frac{h_1-h_2}{h_1-h_{2s}}\\\\\eta_{turbine} = \frac{3093.3\ KJ/kg-2684.9\ KJ/kg}{3093.3\ KJ/kg-2416.088\ KJ/kg}\\\\\eta_{turbine} = \frac{408.4\ KJ/kg}{677.212\ KJ/kg}\\\\\eta_{turbine} = 0.603 = 60.3\%$

3 0

3 years ago

Set up the following characteristic equations in the form suited to Evanss root-locus method. Give L(s), a(s), and b(s) and the

Sunny_sXe [5.5K]

Answer:

attached below is the detailed solution and answers

Explanation:

Attached below is the detailed solution

C(iii) : versus the parameter C

The parameter C is centered in a nonlinear equation, therefore the standard locus will not apply hence when you use a polynomial solver the roots gotten would be plotted against C

4 0

4 years ago

A cylindrical drill with radius 4 is used to bore a hole through the center of a sphere of radius 5. Find the volume of the ring

ANTONII [103]

Answer:

The volume of the ring shaped solid that remains is 21 unit^3.

Explanation:

The total volume of the sphere is given as:

Volume of Sphere = (4/3)πr^3

where, r = radius of sphere

Volume of Sphere = (4/3)(π)(5)^3

Volume of Sphere = 523.6 unit^3

Now, we find the volume of sphere removed by the drill:

Volume removed = (Cross-sectional Area of drill)(Diameter of Sphere)

Volume removed = (πr²)(D)

where, r = radius of drill = 4

D = diameter of sphere = 2*5 = 10

Therefore,

Volume removed = (π)(4)²(10)

Volume removed = 502.6 unit^3

Therefore, the volume of ring shaped solid that remains will be the difference between the total volume of sphere, and the volume removed.

Volume of Ring = Volume of Sphere - Volume removed

Volume of Ring = 523.6 - 502.6

<u>Volume of Ring = 21 unit^3</u>

5 0

3 years ago

Which clauses in the Software Engineering Code of Ethics are upheld by a whistleblower (check all that apply). a. "Respect confi

garri49 [273]

Answer:

c. and d

Explanation:

As a whistle-blower, one of your aim is to guide against unethical dealings of other people , hence you are creating an environment that uphold ethical conduct,

In addition, whistle-blowing will disclose all imminent dangers to the software community thereby preventing security breaches.

6 0

3 years ago

A cylindrical brass rod has a length of 5.00cm extending from a holder and a diameter of 4.50mm. Its Young's modulus is 98.0GPa.

Galina-37 [17]

Answer:

elongation of the brass rod is 0.01956 mm

Explanation:

given data

length = 5 cm = 50 mm

diameter = 4.50 mm

Young's modulus = 98.0 GPa

load = 610 N

to find out

what will be the elongation of the brass rod in mm

solution

we know here change in length formula that is express as

δ = $\frac{PL}{AE}$ ................1

here δ is change in length and P is applied load and A id cross section area and E is Young's modulus and L is length

so all value in equation 1

δ = $\frac{PL}{AE}$

δ = $\frac{610*50}{\frac{\pi}{4} * 4.50^2 * 98*10^3}$

δ = 0.01956 mm

so elongation of the brass rod is 0.01956 mm

7 0

3 years ago