Answer:
No
Explanation:
When the two bodies at different temperatures then heat transfer takes place between two bodies. Temperature is the necessary condition for the heat transfer.
The energy can flow due to pressure difference but the heat transfer can not take place only due to pressure difference. Heat transfer needs temperature difference.
Therefore the answer will be No.
Answer:
B. Technician B only
Explanation:
An oscilloscope can be used to check the output signal of an optical sensor. The oscilloscope has the functioning of viewing the results in the form of waveform and its time scale settings can be altered to meet the requirements of the results.
A voltmeter cannot be <u>directly</u> used to monitor the output signal of an optical sensor. But a <u>digital multi-meter</u> can be used to check an optical sensor if the digital multi-meter is set on AC - Volt reading mode.
Answer:
So, we can assemble the options based or evaluation of there properties regarding getting an equilibrium or balanced state in a given time.We have the following rankings attributed to the elements:
- Silveringpot≥ aluminiumpot ≥ironskillet ≥glasscasseroldish ≥welldone steak ≥woodencuttingboard.
Explanation:
<u>Attaining equilibrium matters:</u>
When the materials are placed inside the oven, they attain a high temperature value causing it to be non touchable but some of the items has low value to attain the equilibrium state when comes in contact with other mediums. As these materials are also arranged based on that analyses.
The conservation of momentum states that the total momentum in a system is constant if there is no external force acting on the system. The total momentum in the gun bullet system is 0 so it must stay that way.
The momentum of the bullet is mv = 0.015*500=7.5
The momentum of the gun must be the same to keep the total momentum of the system equal to zero, so we know that p = 7.5 for the gun.
Substituting this in we get:
7.5=3.1x
x=7.5/3.1
x=2.42
So the speed of the gun is 2.4m/s.
Inertia: tendency of an object to resist changes in its velocity. An object at rest has zero velocity - and (in the absence of an unbalanced force) will remain with a zero velocity. Such an object will not change its state of motion (i.e., velocity) unless acted upon by an unbalanced force.
~done by cessly420
mark brainliest please
hope this helped :)
