Which Salesforce editions provide option for customizing profiles?

1 answer:

8 0

In Professional, Enterprise, Unlimited, Performance, and Developer Editions, you can use standard profiles or create, edit, and delete custom profiles.

You might be interested in

An air conditioner removes heat steadily from a house at a rate of 750 kJ/min while drawing electric power at a rate of 6 kW. De

Paraphin [41]

Answer:

a. 2.08, b. 1110 kJ/min

Explanation:

The power consumption and the cooling rate of an air conditioner are given. The COP or Coefficient of Performance and the rate of heat rejection are to be determined. <u>Assume that the air conditioner operates steadily.</u>

a. The coefficient of performance of the air conditioner (refrigerator) is determined from its definition, which is

COP(r) = Q(L)/W(net in), where Q(L) is the rate of heat removed and W(net in) is the work done to remove said heat

COP(r) = (750 kJ/min/6 kW) x (1 kW/60kJ/min) = 2.08

The COP of this air conditioner is 2.08.

b. The rate of heat discharged to the outside air is determined from the energy balance.

Q(H) = Q(L) + W(net in)

Q(H) = 750 kJ/min + 6 x 60 kJ/min = 1110 kJ/min

The rate of heat transfer to the outside air is 1110 kJ for every minute.

5 0

4 years ago

The Ethernet (CSMA/CD) alternates between contention intervals and successful transmissions. Assume a 100 Mbps Ethernet over 1 k

Vesnalui [34]

<h3><u>CSMA/CD Protocol: </u></h3>

Carrier sensing can transmit the data at anytime only the condition is before sending the data sense carrier if the carrier is free then send the data.

But the problem is the standing at one end of channel, we can’t send the entire carrier. Because of this 2 stations can transmit the data (use the channel) at the same time resulting in collisions.

There are no acknowledgement to detect collisions, It's stations responsibility to detect whether its data is falling into collisions or not.

<u>Example: </u>

$T_{P}=1 H r$ , at time t = 10.00 AM, A starts, 10:59:59 AM B starts at time 11:00 AM collision starts.

12:00 AM A will see collisions

Pocket Size to detect the collision.

$\begin{aligned}&T_{t} \geq 2 T_{P}\\&\frac{L}{B} \geq 2 T_{P}\\&L \geq 2 \times T_{P} \times B\end{aligned}$

CSMA/CD is widely used in Ethernet.

<u>Efficiency of CSMA/CD:</u>

In the previous example we have seen that in worst case $2 T_{P}$ time require to detect a collision.

There could be many collisions may happen before a successful completion of transmission of a packet.

We are given number of collisions (contentions slots)=4.

$\text { Propagation day }=\frac{\text {distance}}{\text {speed}}$

Distance = 1km = 1000m

$\begin{aligned}&\text { Speed }=2 \times 10^{8} \mathrm{m} / \mathrm{sec}\\ &T_{P}=\frac{1000}{2 \times 10^{8}}=(0.5) \times 10^{-5}=5 \times 10^{-6}\\ &T_{t}=5 \mu \mathrm{sec}\end{aligned}$