Using four registers, design a circuit that stores the four values present at an 8-bit input D during the previous four clock cy
cles. The circuit should have a single 8-bit output that can be configured using two inputs s1 and s0 to output any one of the four registers
1 answer:
Answer:
answer is attached
Explanation:
The number of individual data latches required to make up a single Shift Register device is usually determined by the number of bits to be stored with the most common being 8-bits (one byte) wide constructed from eight individual data latches.
Shift Registers are used for data storage or for the movement of data and are therefore commonly used inside calculators or computers to store data such as two binary numbers before they are added together, or to convert the data from either a serial to parallel or parallel to serial format. The individual data latches that make up a single shift register are all driven by a common clock ( Clk ) signal making them synchronous devices.
You might be interested in
Answer:
Enter the following code to get the required conditions for the answer.
boston_under_5_height = 1.2
manila_under_5_height = 0.6
boston_5_to_under_10_height = 3.2
manila_5_to_under_10_height = 1.4
boston_under_10 = boston_under_10 = 5*boston_under_5_height + 5*boston_5_to _under_10_height
manila_under_10 = manila_under_10 = 5*manila_under_5_height + 5*manila_5_to _under_10_height
Explanation:
Kindly note that question in complete as it belong to the topic of table manipulation and visualization topic. The question asks about the company called Uber and their data extraction from the website called movements.uber.com where data was extracted for 200,000 weekdays in the respective cities of Manila, Philippines and Boston, Massachusetts. Images attached contains the histograms generated for the rides in manila and boston.
