ave you ever seen a Rube Goldberg machine in action? You probably have, even if you didn’t know what it was. A Rube Goldberg machine is a contraption that uses a chain reaction to carry out a simple task. It performs a very basic job in a complicated way.
Answer:
V₂ = 20 V
Vt = 20 V
V₁ = 20 V
V₃ = 20 V
I₁ = 10 mA
I₃ = 3.33 mA
It = 18.33 mA
Rt = 1090.91 Ω
Pt = 0.367 W
P₁ = 0.2 W
P₂ = 0.1 W
P₃ = 0.067 W
Explanation:
Part of the picture is cut off. I assume there is a voltage source Vt there?
First, use Ohm's law to find V₂.
V = IR
V₂ = (0.005 A) (4000 Ω)
V₂ = 20 V
R₁ and R₃ are in parallel with R₂ and the voltage source Vt. That means V₁ = V₂ = V₃ = Vt.
V₁ = 20 V
V₃ = 20 V
Vt = 20 V
Now we can use Ohm's law again to find I₁ and I₃.
V = IR
I = V/R
I₁ = (20 V) / (2000 Ω)
I₁ = 0.01 A = 10 mA
I₃ = (20 V) / (6000 Ω)
I₃ = 0.00333 A = 3.33 mA
The current It passing through Vt is the sum of the currents in each branch.
It = I₁ + I₂ + I₃
It = 10 mA + 5 mA + 3.33 mA
It = 18.33 mA
The total resistance is the resistance of the parallel resistors:
1/Rt = 1/R₁ + 1/R₂ + 1/R₃
1/Rt = 1/2000 + 1/4000 + 1/6000
Rt = 1090.91 Ω
Finally, the power is simply each voltage times the corresponding current.
P = IV
Pt = (0.01833 A) (20 V)
Pt = 0.367 W
P₁ = (0.010 A) (20 V)
P₁ = 0.2 W
P₂ = (0.005 A) (20 V)
P₂ = 0.1 W
P₃ = (0.00333 A) (20 V)
P₃ = 0.067 W
Answer: if most people are driving the way that you are
Explanation:the law of the many
Answer:
sorry I couldn't help you
Explanation:
1. Circumference is pi times diameter.
C = πd
C = 9π inches
C ≈ 28.3 inches
2. Mechanical advantage is ratio of output force to input force.
MA = Fout / Fin
MA = 155 lb / 15 lb
MA ≈ 10.3
3. Mechanical advantage is ratio of input distance over output distance.
MA = din / dout
MA = 10.5 in / 0.85 in
MA ≈ 12.4
4. Mechanical advantage of pulley system is the number of strands.
MA = 8
5. Mechanical advantage is ratio of output force to input force.
MA = Fout / Fin
8 = Fout / 200 lb
Fout = 1600 lb
