Answer:
Explanation:
Availability:
It define as the probability of system which perform desired task before showing any failure .
The availability can be define as follows
Or we can say that
Availability can also be express as
Where MTBF is the mean time between two failure.
MTTR is the mean time to repair.
Answer:
135 hour
Explanation:
It is given that a carburizing heat treatment of 15 hour will raise the carbon concentration by 0.35 wt% at a point of 2 mm from the surface.
We have to find the time necessary to achieve the same concentration at a 6 mm position.
we know that 
where x is distance and t is time .As the temperature is constant so D will be also constant
So 
then 
we have given 
and we have to find 
putting all these value in equation
so 
Answer:
R=1923Ω
Explanation:
Resistivity(R) of copper wire at 20 degrees Celsius is 1.72x10^-8Ωm.
Coil length(L) of the wire=37.0m
Cross-sectional area of the conductor or wire (A) = πr^2
A= π * (2.053/1000)/2=3.31*10^-6
To calculate for the resistance (R):
R=ρ*L/A
R=(1.72*10^8)*(37.0)/(3.31*10^-6)
R=1922.65Ω
Approximately, R=1923Ω
Answer:
Both Technician A and B are correct.
Explanation: A brake lathe is a special tool used to improve or work on the surface of brake pads it helps to smoothen the surface.
Brake lathe has been found to be very effective in removing rusts in rotors and unevenness in the brake pad surfaces in order to ensure the efficiency and effectiveness of the brake system of a vehicle. Hence, a brake lathe helps to make brake rotor surface as smooth as possible.
