It is a reaction between an element and a compound that results in a different element and compound
A thermocouple is a sensor used to measure temperature. Thermocouples are made with two wires of different metals, joined together at one end to form a junction. ... Naturally, a thermocouple outputs a millivolt signal, therefore, as the resistance changes, the change in voltage can be measured.
-nat geo
Answer:
CH3 - CH2 - NH - C(CH3)3
Explanation:
The 1HNMR is the acronym for Proton nuclear magnetic resonance and it is used in chemistry or Chemical laboratory for the analysis and identification of compounds.
In order to be able to answer the question accurately you have to have the tables containing all the values for chemical shift. The Chemical shift is measured in ppm and it occur due to Resonance frequency variation.
From the table, a singlet at 1.15 ppm (9H) is - C(CH3)3.
A singlet at d 0.9 ppm (1H) shows the presence of a secondary amine group, that is -R2NH group.
A triplet at 1.10 ppm (3H) shows that we have;
CH3- CH2-
A quartet at 2.6 ppm (2H) shows that we have;
-CH2 - CH3.
Therefore, joining all together we have;
CH3 - CH2 - NH - C(CH3)3.
Kindly check attached file for the picture of the structure.
Answer:
Percent error = 12.5%
Explanation:
In a measurement you can find percent error following the formula:
Percent error = |Measured value - Accepted Value| / Acepted value * 100
Based on the data of the problem, accepted value is 22.4L and the measured Value (Value of Sara) was 19.6L.
Replacing:
Percent error = |Measured value - Accepted Value| / Acepted value * 100
Percent error = |19.6L - 22.4L| / 22.4L * 100
Percent error = |-2.8L| / 22.4L * 100
Percent error = 2.8L / 22.4L * 100
Percent error = 12.5%