Answer:
draw it 3D
Explanation:
because it's a 3D picture
Answer:
Maximum allowable chip power is 0.35 W
Explanation:
This question is incomplete. The complete question is
A square isothermal chip is of width w = 5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the front surface is exposed to the flow of a coolant at t[infinity] = 15°c. from reliability considerations, the chip temperature must not exceed t = 85°c. f the coolant is air and the corresponding convection 200 w/m2 k, what is the maximum allowable chip power?
<u>ANSWER:</u>
The heat transfer through convection, we have the equation:
q = hA(T - T∞)
where,
q = power transfer through convection = ?
h = convection coefficient = 200 W/m²K
A = Area of convection surface = (0.005 m)² = 0.000025 m²
T = Chip surface temperature = 85° C
T∞ = Fluid temperature = 15° C
Therefore,
q = (200 W/m².K)(0.000025 m²)(85° C - 15° C)
<u>q = 0.35 W</u>
Since, difference in temperature is same on both Celsius and kelvin scale. Therefore, Celsius is written as kelvin for difference and they shall be cancelled.
Answer:
<em>The maximum efficiency the plant will ever achieve is 75%</em>
<em>Explanation:</em>
From the question given, we recall the following:
<em>Th flames in the boiler reaches a temperature of = 1200K</em>
<em>the cooling water is = 300K</em>
<em>The maximum efficiency the plant will achieve is defined as:</em>
Let nmax = 1 - Tmin /Tmax
Where,
Tmin = Minimum Temperature in plants
Tmax = Maximum Temperature in plants
The temperature of the cooling water = Tmin = 300K
The temperature of the flames in boiler = Tmax = 1200k=K
The maximum efficiency becomes:
nmax = 1 - Tmin /Tmax
nmax = 1 - 300 /1200
nmax = 1-1/4 =0.75
nmax = 75%
Answer: (C) 9.14 . 10⁻³ Ω
Explanation:
The resistance of a resistor, is proportional to his length and inversely proportional to his area, being the proportionality constant a property of the material, called resistivity.
The resistivity is defined as the inverse of the electrical conductivity, which depends on the number of charge carriers and the mobility of these carriers, which is different for each material.
So, we can calculate the resistance as follows:
R = 1/σ . L / A, where:
σ = electrical conductivity, l= length of the wire , A = wire cross-section (assumed circular).
Replacing by the values, we can calculate R as follows:
R = 1/6.1. 10⁷ (Ω.m) . 8.1 m. / π (0.0043)² m / 4 = 9.14 . 10⁻³ Ω
Answer:
The confidence scale represents an ordinal scale of measurement
Explanation:
An ordinal scale or level of measurement is used to measure attributes that can be ranked or ordered, but the interval between the attributes do not have quantitative significance. In this case, the measurement was done on a scale of 1 - 7, with a "1" being; not all that race of defendant has an impact on jury verdicts and a "7" being "very" meaning that race indeed has impact on jury verdicts. Another example can be a survey carried out on the level of customer satisfaction on a particular product, with "1" most dissatisfied and "10 " representing most satisfied. In the first example, it is wrong to say that the difference between 1 being "not at all" and maybe 3 is the same as the difference between 5 and 7 which have different connotations, because the numbers are merely for tagging and not to quantify.
Other levels of measurement include:
1. Nominal: this is the simplest level of measurement and it is simply used to categorize the attributes. Example is taking a survey on gender in the categories of male, female and transgender.
2. Interval: the interval scale is used when the distance between two attributes have meanings but there is no true zero value associated with the scale.
3. Ratio: this combines all the other three levels of measurement and is used to categorize, used to show ranking, has meaningful distances between the attributes and the scale has a true zero point. Example is the measurement of temperature using the celcius scale thermometer, where there is a true zero point at 0°C and the distance between 5°C and 10°C is the same as the distance between 10°C and 15°C.
