Answer:
The intensity of laser 2 is 4 times of the intensity of laser 1.
Explanation:
The intensity in terms of electric field is given by :

E is electric field
It means, 
In this problem, lasers 1 and 2 emit light of the same color, and the electric field in the beam of laser 1 is twice as strong as the e-field of laser 2.
Let E is electric field in the beam of laser 1 and E' is the electric field in the beam of laser 2. So,

We have,
E'=2E
So,

So, the intensity of laser 2 is 4 times of the intensity of laser 1.
Wind acts as an agent of Erosion and deposition because it can erode the sediments from the rock etc then deposit it someplace else
The first: alright, first: you draw the person in the elevator, then draw a red arrow, pointing downwards, beginning from his center of mass. This arrow is representing the gravitational force, Fg.
You can always calculate this right away, if you know his mass, by multiplying his weight in kg by the gravitational constant

let's do it for this case:

the unit of your fg will be in Newton [N]
so, first step solved, Fg is 637.65N
Fg is a field force by the way, and at the same time, the elevator is pushing up on him with 637.65N, so you draw another arrow pointing upwards, ending at the tip of the downwards arrow.
now let's calculate the force of the elevator

so you draw another arrow which is pointing downwards on him, because the elevator is accelating him upwards, making him heavier
the elevator force in this case is a contact force, because it only comes to existence while the two are touching, while Fg is the same everywhere
Answer:
0.6kg
Explanation:
the unknown here is the mass of the second block
applying the law of the conservation of momentum
m₁v₁ + m₂v₂ = (m₁ + m₂) v₃
where m₁=mass of first block=2.2kg
m₂=mass of colliding block= ?
v₁= velocity of first block=1.2m/s
v₂=velocity of colliding block=4.0m/s
v₃= final velocity of combined block=1.8m/s
applying the formula above
(2.2 × 1.2) + (m₂ × 4) = (2.2 + m₂) × 1.8
2.64 + 4m₂ = 3.96 + 1.8m₂
collecting like terms
4m₂ - 1.8m₂ = 3.96 - 2.64
2.2m₂=1.32
divide both sides by 2.2
m₂= 0.6kg
<h2>The voltmeter reading will be 35.7 volt </h2>
Explanation:
The resistor 1000 ohm and 4000 ohm are connected in parallel .
Their combined resistance is supposed R₁
Thus
=
+
or R₁ = 800 ohm
Therefore the total resistance in circuit is = 2000 + 800 = 2800 ohm
Because these are in series .
We can find current flowing through the circuit I =
=
= 
here R is total resistance .
The potential difference across 1000 ohm =
x 1000 = 35.7 volt
Thus voltmeter reading will be 35.7 volt