The smaller the area the greater the pressure, while the bigger the smaller the pressure. So they are inversely proportional
If you want to tell a friend about a fish you caught or a tree you cut down,
you're going to tell him WHERE you were ... its position in space, 3 numbers,
'x', 'y', and 'z' ... and also WHEN you were ... its position in time, one more
number.
Dimensions are numbers used to describe the location of a point, and the
difference in location between two points. With four numbers, you can exactly
describe the location of anything, and its distance from any other thing, in
space and time.
Answer:
Explanation:
Potential energy is the energy of a body due to is virtue of rest.
Potential energy is given as mgh
g is a constant and it is 9.81m/s²
And also the mass of the body is given as 1.3kg
Now the height of the body is
He took a book to a storey building of height 26m
He still holds the book 151 cm (1.51m) above the house.
The house is on an altitude of 1609m from the sea level.
Total Ug with out the sea level is
Ug=mgh
Ug=1.3 × 9.81 ×(26+1.51)
Ug=350.84J
Then, the potential energy due to the sea level is given as
Ug=mgh
Where g = 1/6371 m/s²
Therefore
Ug=mgh
Ug=1.3 × 1/6371 ×1609
Ug=0.328J
Total energy = 0.328+350.84
Ug=351.17J
Answer:
1.) Micrometres screw gauge
2.) Tape rule.
Explanation:
Given that the diameter and the length of a thin wire, approximately 1m in length, are measured as accurately as possible.
what are the best instruments to use ?
To measure the diameter of a thin wire, the best instrument to use is known as micrometres screw gauge.
And to measure the length of a thin wire up to 1 m, the measuring device can be tape rule or long metre rule.
