Answer:
400ft. 32ft/s -32ft/s
Explanation:
In reality the gravitational acceleration is 9.81 so the quadratic coefficient of the function should be 9.81/2
Anyway for the sake of assumtion let us takes=160t-16t^2
ds/dt=160-32t=0
t=160/32= 5 seconds.
s=160*160/32-16*(160/32)^2= 400 mts
s=384 mts
160t-16t^2=384
i.e
16t^2-160t+384=0
t^2-10t+24=0
(t-6)(t-4)=0
t=[4,6]
we have to take t=4 because it is all the up i.e <5
velocity =v=ds/dt=160-32t
v=160-32*4=32 ft/sec still going up
for all the way down take t=6 whuch is >5
v=160-6*32=-32 ft/sec (falling down!!!)
Answer:
the net toque is τ=8.03* 10⁻⁴ N*m
Explanation:
Assuming the disk has constant density ρ, the moment of inertia I of is
I = ∫r² dm
since m = ρ*V = ρπR² h , then dm= 2ρπh r dr
thus
I = ∫r²dm = ∫r²2ρπh r dr =2ρπh ∫r³ dr = 2ρπh (R⁴/4- 0⁴/4)= ρπhR⁴ /2= mR²/2
replacing values
I = mR²/2= 0.017 kg * (0.06 m)²/2 = 3.06 *10⁻⁵ kg*m²
from Newton's second law applied to rotational motion
τ= Iα , where τ=net torque and α= angular acceleration
since the angular velocity ω is related with the angular acceleration through
ω= ωo + α*t → α =(ω-ωo)/t = (21 rad/s-0)/0.8 s = 26.25 rad/s²
therefore
τ= Iα= 3.06 *10⁻⁵ kg*m²*26.25 rad/s² = 8.03* 10⁻⁴ N*m
Answer:
9.98 × 10⁻⁹ C
Explanation:
mass, m = 1.00 × 10⁻¹¹ kg
Velocity, v = 23.0 m/s
Length of plates D₀ = 1.80 cm = 0.018 m
Magnitude of electric field, E = 8.20 × 10⁴ N/C
drop is to be deflected a distance d = 0.290 mm = 0.290 × 10⁻³ m
density of the ink drop = 1000 kg/m^3
Now,
Time = 
or
Time = 
or
Time = 6.9 × 10⁻⁴ s
Now, force due to the electric field, F = q × E
where, q is the charge
Also, Force = Mass × acceleration
q × E = 1.00 × 10⁻¹¹ × a
or
a = 
Now from the Newton's equation of motion
where,
d is the distance
u is the initial speed
a is the acceleration
t is the time
or
or
q = 9.98 × 10⁻⁹ C
When an object does not move even on pushing , static frictional force acts on in opposite direction of the applied force to stop the object from moving. static frictional force is a self adjusting force and it adjust its value according to the applied force if the applied force is smaller than the maximum value of static frictional force. The object starts moving once the applied force on it becomes greater than the maximum static frictional force. hence the statement is true.
