Answer:
T = 15 kN
F = 23.33 kN
Explanation:
Given the data in the question,
We apply the impulse momentum principle on the total system,
mv₁ + ∑
= mv₂
we substitute
[50 + 3(30)]×10³ × 0 + FΔt = [50 + 3(30)]×10³ × ( 45 × 1000 / 3600 )
F( 75 - 0 ) = 1.75 × 10⁶
The resultant frictional tractive force F is will then be;
F = 1.75 × 10⁶ / 75
F = 23333.33 N
F = 23.33 kN
Applying the impulse momentum principle on the three cars;
mv₁ + ∑ = mv₂
[3(30)]×10³ × 0 + FΔt = [3(30)]×10³ × ( 45 × 1000 / 3600 )
F(75-0) = 1.125 × 10⁶
The force T developed is then;
T = 1.125 × 10⁶ / 75
T = 15000 N
T = 15 kN
I say the answers is A but if you mean ventilation in the area of the room then answer B
The right components for gsm architecture that consists of the hardware or physical equipment such as digital signal processors, radio transceiver, display, battery, case and sim card is the Mobile station.
<h3>What are the 4 main components?</h3>
In GSM, a cell station includes 4 fundamental additives: Mobile termination (MT) - gives not unusualplace features consisting of: radio transmission and handover, speech encoding and decoding, blunders detection and correction, signaling and get right of entry to to the SIM. The IMEI code is connected to the MT.
Under the GSM framework, a cell tele cell smartphone is called a Mobile Station and is partitioned into wonderful additives: the Subscriber Identity Module (SIM) and the Mobile Equipment (ME).
Read more about the mobile station:
brainly.com/question/917245
#SPJ4
Answer:
a) A suspended floor is a ground floor with a void underneath the structure. The floor can be formed in various ways, using timber joists, precast concrete panels, block and beam system or cast in-situ with reinforced concrete. However, the floor structure is supported by external and internal walls.
b) Soil exploration consists of determining the profile of the natural soil deposits at the site, taking the soil samples and determining the engineering properties of soils using laboratory tests as well as in-situ testing methods
c) Bulking in sand Occurs When dry sand interacts with the atmospheric moisture. Presence of moisture content forms a thin layer around sand particles. This layer generates the force which makes particles to move aside to each other. This results in the increase of the volume of sand.
d) In a nutshell, bearing capacity is the capacity of soil to support the loads that are applied to the ground above. It depends primarily on the type of soil, its shear strength and its density. It also depends on the depth of embedment of the load – the deeper it is founded, the greater the bearing capacity.
Explanation:
<h2>please follow me</h2>
Answer:
The correct answer is
option C. current to pneumatic (V/P)
Explanation:
A current to pneumatic controller is basically used to receive an electronic signal from a controller and converts it further into a standard pneumatic output signal which is further used to operate a positioner or control valve. These devices are reliable, robust and accurate.
Though Voltage and current to pressure transducers are collectively called as electro pneumatic tranducers and the only electronic feature to control output pressure in them is the coil.
